Nasdaq Nordic · interim-report
Kvartalsrapport Q1 2026
185296 tecken · 2 HTML-del(ar)
Automatiskt nyckeltalsindex
Detta är sökträffar och textkontext, inte verifierade eller normaliserade redovisningsvärden.
Omsättning
- of the smaller royalty is deductible from the larger royalty, meaning | that the royal ty obligation shall not exceed 1.0 % of the net sales | revenue.
- that the royal ty obligation shall not exceed 1.0 % of the net sales | revenue. | • VISCARIA and Laevas Sami village have entered a cooperation
- exchange rates, | revenue / price curves, | royalties, cut-off
- used for the calculation such as exchange rates, | revenue / price curves, royalties, cut -off grades, | pay limits.
Kassaflöde
- Exploration Results | Cash Flow forecast on an annual basis using | Mineral Reserves or an annual production
Fulltext
Dokumentet är delat för att hålla varje sida lätt att hämta. Del 1 · Del 2
===== SIDA 1 =====
1
PERC Table 1
Viscaria Exploration Results, Q1 2026
MAY 2026
===== SIDA 2 =====
i
Table of Contents
PERC REPORTING STANDARD ................................ ................................ ................................ ................. 1
Section 1 Project Outline ................................ ................................ ................................ ........................... 1
1.0. Introduction – General ................................ ................................ ................................ ................ 1
1.0. Introduction – General ................................ ................................ ................................ ..................... 2
1.0. Introduction – General ................................ ................................ ................................ ..................... 3
1.1. Property Description ................................ ................................ ................................ ................... 3
1.2. Location ................................ ................................ ................................ ................................ ....... 4
1.3. Adjacent Properties ................................ ................................ ................................ .................... 5
1.4. History ................................ ................................ ................................ ................................ ......... 5
1.5. Legal Aspects and Permitting ................................ ................................ ................................ .... 6
1.6. Royalties ................................ ................................ ................................ ................................ ...... 7
1.7. Liabilities ................................ ................................ ................................ ................................ ..... 8
Section 2 Geological Setting, Deposit, Mineralisation ................................ ................................ ............. 9
2.1. Geological Setting, Deposit Type and Mineralisation Style ................................ ..................... 9
Section 3 Exploration and Drilling, Sampling Techniques and Data ................................ ..................... 13
3.1. Exploration ................................ ................................ ................................ ................................ 13
3.2. Drilling Techniques ................................ ................................ ................................ ................... 14
3.3. Sample Method, Collection, Capture, and Storage ................................ ................................ . 15
3.4. Sample Preparation and Analysis ................................ ................................ ............................ 16
3.5. Sampling Governance ................................ ................................ ................................ .............. 17
3.6. Quality Control/Quality Assurance ................................ ................................ .......................... 18
3.7. Bulk Density ................................ ................................ ................................ .............................. 18
3.8. Bulk-Sampling and/or Trial-mining ................................ ................................ .......................... 19
Section 4 Estimation and Reporting of Exploration Results, Mineral Resources and Mineral Reserves
................................ ................................ ................................ ................................ ................................ ... 20
4.1. Geological model and interpretation ................................ ................................ ....................... 20
4.2. Estimation and modelling techniques ................................ ................................ ..................... 21
4.3. Reasonable prospects for eventual economic extraction ................................ ...................... 22
4.4. Classification Criteria ................................ ................................ ................................ ............... 22
4.5. Reporting ................................ ................................ ................................ ................................ ... 23
4.5. Reporting ................................ ................................ ................................ ................................ ........ 24
Section 5 Technical Studies ................................ ................................ ................................ ..................... 25
5.1. Introduction ................................ ................................ ................................ ............................... 25
5.2. Mining Design................................ ................................ ................................ ............................ 26
5.3. Metallurgical and Test work ................................ ................................ ................................ ...... 28
5.4. Infrastructure ................................ ................................ ................................ ............................. 30
5.5. Environmental, Social Performance, and Governance ................................ ........................... 31
5.6. Market Studies and Economic Criteria ................................ ................................ .................... 35
===== SIDA 3 =====
ii
5.7. Risk Analysis ................................ ................................ ................................ ............................. 39
5.8. Economic Analysis ................................ ................................ ................................ ................... 39
Section 6 Estimation and Reporting of Mineral Reserves ................................ ................................ ..... 41
6.1. Estimation and Modelling Techniques ................................ ................................ ..................... 41
6.2. Classification Criteria ................................ ................................ ................................ ............... 43
6.3. Reporting ................................ ................................ ................................ ................................ ... 43
6.4. Specific for Metal Equivalents or Combined Grades Reporting ................................ ............ 45
Section 7 Audits and Reviews ................................ ................................ ................................ ................. 46
7.1. Audits and Reviews ................................ ................................ ................................ .................. 46
Section 8 Other Relevant Information ................................ ................................ ................................ ..... 47
8.1. Other Relevant Information ................................ ................................ ................................ ...... 47
Section 9 Qualification of Competent Person(s) and other key technical staff. Date and Signature
Page ................................ ................................ ................................ ................................ ........................... 48
9.1. Competent Person Details ................................ ................................ ................................ ........ 48
APPENDIX 1: FIGURES ................................ ................................ ................................ ............................ 49
APPENDIX 2: ASSAY RESULTS ................................ ................................ ................................ ............... 54
APPENDIX 2.1: Summary ................................ ................................ ................................ ..................... 54
APPENDIX 2.2: Full assay results ................................ ................................ ................................ ........ 55
APPENDIX 3: REFERENCES ................................ ................................ ................................ .................... 90
APPENDIX 4: CERTIFICATE OF COMPETENT PERSON ................................ ................................ ........ 91
===== SIDA 4 =====
1
Table 1. PERC Reporting Standard
PERC REPORTING STANDARD
Section 1 Project Outline
1.0. Introduction – General Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) The terms of reference or scope of work.
During Q1 2026 Table 1 preparation, the Company identified that
drillhole 'VDD24115B' final assay results were incorporated into
the Q1 2025 Mineral Resource Estimate but were not disclosed as
standalone exploration results, having previously been reported
as assays pending in Q4 2024. The material information was
already disclosed through the published MRE.
• Reporting of PERC (2021) compliant Exploration Results of the
Viscaria deposit located in Kiruna, Sweden.
• The Report has been prepared by Viscaria Kiruna AB (“VISCARIA”),
formerly Copperstone Viscaria AB (“Copperstone”) to disclose the
most recent results from the near mine exploration campaigns
performed in 2026. The program has been performed close in
accordance with the Pan European Reserves and Resources
Reporting Committee (“PERC”) on the Viscaria Copper-Iron Project
in Sweden.
• This report covers assay results for two completed diamond
drillholes and one on -going drillhole from the current drilling
program:
• VDD25013D: Completed; targeting the gap between B Zone and
B Zone Deep
• VDD24036: Completed; targeting down-dip extension of D Zone
mineralization at depth
• VDD25013E: On -going; southwest step -out (~770 m) from
existing D Zone mineralisation intersected, assays pending.
• During Q1 2026 Table 1 preparation, the Company identified that
drillhole 'VDD24115B' final assay results were incorporated into the
Q1 2025 Mineral Resource Estimate but were not disclosed as
standalone exploration results, having previously been reported as
assays pending in Q4 2024. The material information was already
disclosed through the published MRE.
(Continued on next page)
===== SIDA 5 =====
2
1.0. Introduction – General Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) The terms of reference or scope of work. • For completeness, transparency, and full traceability of the data
supporting Mineral Resource, the Company has decided to formally
report the detailed exploration results for drillhole VDD24115B in
this update. This disclosure does not represent new material
information but provides supporting detail for data previously
included in the published Mineral Resource Statement.
• The report is prepared by Gruvaktiebolaget Viscaria and evaluated
by an independent Competent Person (CP): Mr. Thomas Lindholm.
(ii) The Competent Person’s relationship to the issuer of the report, if any. • The CP for the Exploration Results is Mr. Thomas Lindholm MSc
FAusIMM, FAMMP, who is a senior associate of and Principal
Consultant (Resource Geology) at GeoVista AB. He is a Fellow of
the Australasian Institute of Mining and Metallurgy, a Recognised
Professional Organisation (“RPO”) within the meaning of PERC. Mr.
Lindholm is a senior mining engineer and has long and extensive
experience in exploration, mining and mineral resource estimation of
iron ore, base and precious metals.
• The Competent Person is independent of the issuer.
(iii) A statement for whom the report was prepared; whether it was intended as
a full or partial evaluation or other purpose, work conducted, effective date
of report, and remaining work.
• This Technical Report has been prepared on behalf of the Company
with effective date May 7, 2026.
(iv) Sources of information and data contained in the report or used in its
preparation, with citations if applicable, and a list of references. See APPENDIX 2
(v) A title page and a table of contents that includes figures and tables. See Table of Contents
(vi) An Executive Summary, which briefly summarises important information in
the public report, including property description and ownership, geology and
mineralisation, the status of exploration, development and operations,
Mineral Resource and Mineral Reserve estimates, and the Competent
Person's conclusions and recommendations.
If Inferred Mineral Resources are used, a summary valuation with and if
practical without inclusion of such Inferred Mineral Resources. The
Executive Summary should have sufficient detail to allow the reader to
understand the essentials of the project.
N/A
===== SIDA 6 =====
3
1.0. Introduction – General Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(vii) A declaration from the Competent Person, stating whether “the declaration
has been made in terms of the guidelines of the PERC Reporting Standard”. See the certificate of the Competent Person in APPENDIX 3
(viii) Diagrams, maps, plans, sections and illustrations, which are dated, legible
and prepared at an appropriate scale to distinguish important features.
Maps including a legend, author or information source, coordinate system
and datum, a scale in bar or grid form, and an arrow indicating north.
Reference to a location or index map and more detailed maps showing all
important features described in the text, including all relevant cadastral and
other infrastructure features.
See APPENDIX 1
(ix) The units of measure, currency and relevant exchange rates. • The units of measure are in SI.
(x) The details of the personal inspection on the property by each Competent
Person or, if applicable, the reason why a personal inspection has not been
completed.
• The Competent Person has visited the site on several occasions, the
most recent being in October 2025, and maintained frequent online
communication with the Geology team up to the preparation of Table
1.
1.1. Property Description
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Brief description of the scope of project (i.e. whether in preliminary
sampling, advanced exploration, scoping, pre -feasibility, or feasibility
phase, Life of Mine plan for an ongoing mining operation or closure).
• A Feasibility Study for the project was published in May 2025, with a
planned mine opening in 2028.
(ii) Describe (noting any conditions that may affect possible prospecting/mining
activities) topography, elevation, drainage, fauna and flora, the means and
ease of access to the property, the proximity of the property to a population
center, and the nature of transport, the climate, known associated climatic
risks and the length of the operating season and to the extent relevant to
the mineral project, the sufficiency of surface rights for mining operations
including the availability and sources of power, water , mining personnel,
potential tailings storage areas, potential waste disposal areas, heap leach
pad areas, and potential processing plant sites.
• The location of the mine site, 150 km north of the Arctic Circle and
250 km east of the North Atlantic Sea, strongly affects the climate in
the area. February had the lowest temperature down to average -21°
C. The warmest month is July, when the temperature normally varies
between 9,2° C and 17,6° C.
• Precipitation is greatest during the summer months with an average
precipitation of 94 mm in July, followed by August with 68 mm. Snow
and ice cover the landscape from October to May, with a snow depth
average of 75 cm. Rapid melting during the spring resu lts in a short
and intensive spring flood normally lasting a few weeks in May and
June. The average wind speed at Kiruna Airport measuring station is
3,5 m/s and the dominant wind direction is from the south to south -
west. (Continued on next page)
===== SIDA 7 =====
4
1.1. Property Description Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) Describe (noting any conditions that may affect possible prospecting/mining
activities) topography, elevation, drainage, fauna and flora, the means and
ease of access to the property, the proximity of the property to a population
center, and the nature of transport, the climate, known associated climatic
risks and the length of the operating season and to the extent relevant to
the mineral project, the sufficiency of surface rights for mining operations
including the availability and sources of power, water , mining personnel,
potential tailings storage areas, potential waste disposal areas, heap leach
pad areas, and potential processing plant sites.
• Mining in subarctic conditions means climatic risk to machinery and
labour force, but 100 years of mining tradition in the area has
developed modern technology and work methods that are very well
adapted to the environmental conditions. Water supply and mi ne
drainage systems must be adapted to arctic dry periods during winter
and high flows during late spring and summer, to support process -
and drilling water. (Viscaria Kiruna AB, 2025a)
• Viscaria Kiruna AB has built a new bridge and road to the area to
support the establishment of the mine. The location of the mine near
LKAB Kiirunavaara ensures that the local infrastructure and
workforce are well adapted to underground mining.
(iii) Specify the details of the personal inspection on the property by each CP
or, if applicable, the reason why a personal inspection has not been
completed.
• The Competent Person has visited the site, inspected drill core and
discussed the new discoveries with the geologists on several
occasions, latest in October of 2025. Between site visits, online
technical review sessions are conducted at intervals to monitor
ongoing exploration activities and maintain continuity of technical
oversight.
1.2. Location
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe (noting any conditions that may affect possible prospecting/mining
activities) topography, elevation, drainage, fauna and flora, the means and
ease of access to the property, the proximity of the property to a population
center, and the nature of transport, the climate, known associated climatic
risks and the length of the operating season and to the extent relevant to
the mineral project, the sufficiency of surface rights for mining operations
including the availability and sources of power, water , mining personnel,
potential tailings storage areas, potential waste disposal areas, heap leach
pad areas, and potential processing plant sites.
• The A, B, D and ABBA zones of the Viscaria Copper Project (the
Project) are located in Kiruna Municipality in Norrbotten County, the
northernmost county in Sweden. The project lies approximately 5 km
northwest of the town of Kiruna. The project is located 270 km north-
northwest of the port city of Luleå, which lies on the Gulf of Bothnia
in the northern Baltic Sea, and 130 km southeast of the port city of
Narvik in northern Norway. (Viscaria Kiruna AB, 2025a)
• The coordinate system used in the Project is SWEREF 99 20 15.
(ii) Country Profile: describe information pertaining to the project host country
that is pertinent to the project, including relevant applicable legislation,
environmental and social context etc. Assess, at a high level, relevant
technical, environmental, social, economic, political and other key risks.
• Information pertaining to the project host country, including
applicable legislation, environmental and social context, and other
relevant factors can be found in Viscaria Kiruna AB, 2025b.
===== SIDA 8 =====
5
1.2. Location Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(iii) Provide a general
topocadastral map
Provide a topo-
cadastral map in
sufficient detail to
support the
assessment of
eventual economics.
State the known
associated climatic
risks.
Provide a detailed
topo-cadastral map.
Confirm that applicable
aerial surveys have
been checked with
ground controls and
surveys, particularly in
areas of rugged
terrain, dense
vegetation or high
altitude.
See Figure 2
1.3. Adjacent Properties
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Discuss details of relevant adjacent properties If adjacent or nearby
properties have an important bearing on the report, then their location and
common mineralized structures should be included on the maps. Reference
all information used from other sources.
N/A
1.4. History
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) State historical background to the project and adjacent areas concerned,
including known results of previous exploration and mining activities (type,
amount, quantity and development work), previous ownership and changes
thereto.
• There has been very limited mining in the B Zone and no mining in
the D Zone. Hence there is no reconciliation information available for
these zones.
• In the A zone, 12,5 Mt at 2,3% copper was mined between 1982 -
1997. Experience from past mining operations improves the technical
knowledge used to plan future mining. The old Viscaria mine was
opened and initially operated by LKAB. The mine was later run b y
Outokumpu, before being closed in 1997 due to declining copper
prices.
• In the 2000s rising copper prices led to renewed interest in the
property and exploration was undertaken by Avalon Minerals.
• In 2019 the Project was acquired by Gruvaktiebolaget Viscaria (then
Copperstone Resources AB). (Viscaria Kiruna AB, 2025a)
===== SIDA 9 =====
6
1.4. History Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) Present details of previous successes or failures with reasons why the
project may now be considered potentially economic.
• The previous mine closed due to declining copper prices. Copper
prices are now much higher and projected to remain high.
(iii) Discuss known or existing historical Mineral
Resource estimates and performance statistics
on actual production for past and current
operations.
N/A
(iv) Discuss known or
existing historical
Mineral Reserve
estimates and
performance statistics
on actual production
for past and current
operations.
N/A
1.5. Legal Aspects and Permitting
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) A statement from the Competent Person on the confirmation of the legal
tenure, including a description of (the following):
• The Competent Person has verified the company's tenure in the
publicly available database at the Inspector of Mines office.
(ii) Discuss the nature of the issuer’s rights (e.g. prospecting and/or mining)
and the right to use the surface of the properties to which these rights
relate. Disclose the date of expiry and other relevant details.
• Viscaria Kiruna AB has three granted exploitation concessions under
the Minerals Act (SFS1991: 45); Viscaria K no 3 and K no 4 which
were granted by Bergsstaten (Mining Inspectorate) in January 2012,
both expiring 2037, and Viscaria K no 7 which was granted in March
2018, expiring 2043.
• The exploration results presented are from drilling within or directly
adjacent to these concessions. If mining, development for mining or
other significant work to continue extraction are on-going at the time
of expiry, the concessions will automatically be extended for a 10 -
year period.
(Continued on next page)
===== SIDA 10 =====
7
1.5. Legal Aspects and Permitting Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) Discuss the nature of the issuer’s rights (e.g. prospecting and/or mining)
and the right to use the surface of the properties to which these rights
relate. Disclose the date of expiry and other relevant details.
• The area around the deposit has a detailed plan for mining operations
and is designated as an area of national interest for deposits of
valuable minerals or materials that are of great importance for the
country's supply readiness. (Viscaria Kiruna AB, 202 5b) Viscaria
Kiruna AB also has 11 exploration licenses surrounding the
exploitation concessions. Details for all concessions and licenses
can be found at https://www.viscaria.com/en/
(iii) Present the principal terms and conditions of all existing agreements, and
details of those still to be obtained, (such as, but not limited to,
concessions, partnerships, joint ventures, access rights, leases, historical
and cultural sites, wilderness or national park and environmental settings,
royalties, consents, permission, permits or authorisations).
See the company's tenures at http://www.viscaria.com/en/
(iv) Present the security of the tenure held at the time of reporting or that is
reasonably expected to be granted in the future along with any known
impediments to obtaining the right to operate in the area. State details of
applications that have been made. See Clause 8.1 for declaration of a
Mineral Reserve.
See the company's tenures at http://www.viscaria.com/en/
(v) Provide a statement of any legal proceedings for example, land claims,
that may have an influence on the rights to prospect or mine for minerals,
or an appropriate negative statement.
See the company's tenures at http://www.viscaria.com/en/
(vi) Provide a statement relating to governmental/statutory requirements and
permits as may be required, have been applied for, approved or can be
reasonably be expected to be obtained. Provide a review of risks that
permits will not be received as expected and impact of delays to the
project.
• The final environmental permit for mining was approved in April 2025.
All public information on the permitting process can be found on the
company webpage http://www.viscaria.com/en/
1.6. Royalties
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe the royalties that are payable in respect of each property. • Pursuant to Swedish law, a mineral royalty of 0.2% of the value of
ROM is payable. This comprises 0.05% to the state and 0.15% to
landowners (private landowners own a small part of property inside
the land lease). The royalty cost is estimated to be around US$
500,000 per annuum (net cost).
(Continued on next page)
===== SIDA 11 =====
8
1.6. Royalties Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe the royalties that are payable in respect of each property. • VISCARIA is a party to two of so-called Net Smelter Return (“NSR”)
royalty agreements, entered in February 2008 in connection with
Copperstone Viscaria’s (with a different governance regime and
under another company name) acquisition the Viscaria asset. The
agreements entails a certain industry specific royalty obligation,
originally for the benefit of two different previous owners of this mine
asset, of which the larger royalty right of 1.0 % has been transferred
to EMX Corp ("EMX”), that inter alia, administer NSR -rights
professionally, while the smaller royalty right of 0.5 %, although
capped at MUSD 12, has been transferred to Outokumpu Oyj
("Outokumpu”), parent company to the Swedish subsidiary that
managed and subsequently closed the previous mine. The payment
of the smaller royalty is deductible from the larger royalty, meaning
that the royal ty obligation shall not exceed 1.0 % of the net sales
revenue.
• VISCARIA and Laevas Sami village have entered a cooperation
agreement to enhance both mining operations and reindeer
husbandry in the Viscaria area. As part of the agreement, the parties
have agreed on compensation to be paid for the impact of the mining
operations on the reindeer husbandry.
1.7. Liabilities
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe any liabilities, including rehabilitation guarantees that are
pertinent to the project. Provide a description of the rehabilitation liability,
including, but not limited to, legislative requirements, assumptions and
limitations.
• The mine area will have to be rehabilitated when operations cease.
As a security a bond of 344 MSEK will be deposited with the
Norrbotten County Administrative Board. In the first phase a 60.6
MSEK bond was deposited in order to guarantee rehabilitation of the
initial mine drainage and the water treatment plant.
===== SIDA 12 =====
9
Section 2 Geological Setting, Deposit, Mineralisation
2.1. Geological Setting, Deposit Type and Mineralisation Style Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe the regional geology. • The Viscaria Cu project is located in the center of the Kiruna mining
district, which consists of a Paleoproterozoic (2.5 – 1.8 Ga)
supracrustal sequence, including clastic sedimentary rocks together
with basic and intermediate to acid felsic volcanic rocks.
• The Paleoproterozoic Karelian Suite was formed during a continental
rifting event between 2.5 Ga and 2.0 Ga, and consists of
metamorphosed volcanic, volcano -sedimentary, and sedimentary
rocks. In the Kiruna area, the lowermost unit of the Karelian Suite is
the Kovo Group, which is comprised of quartzite and meta -
conglomerate, overlain by the Kiruna Greenstone Group.
• The Kiruna Greenstone Group is the host group of the Viscaria and
Pahtohavare deposits. It consists of a 2 to 4 km thick sequence of
submarine and subaerial basalts, andesites, volcanoclastic rocks,
turbidites and chemical sedimentary rocks, which were for med
between 2.2 Ga and 2.0 Ga. Several of the sedimentary formations
can be easily traced along 10 km length on the Kiruna district. The
whole sequence is affected by extensional tectonics and igneous sill
emplacements.
• Around 2.0 Ga, there was a shift from extensional to compressional
tectonics, marked by the onset of the Svecokarelian orogeny (1.96
Ga to 1.75 Ga). The Kurravaara Conglomerate Formation
unconformably overlies the Kiruna Greenstone Group.
• The Svecofennian Suite is a supracrustal sequence represented by
arc-related volcanic and sedimentary rocks that include the
Porphyrite Group, the Porphyry Group, and the Hauki Quartzite,
arranged from oldest to youngest, respectively. The volcanic rocks of
the Porphyry Group host economically important IOA’s, such as the
Kiirunavaara and the Per Geijer deposits.
(ii) Describe the project geology including mineral deposit type, geological
setting and style of mineralisation.
• The Kiruna Greenstone Group was deposited on a continental rift
setting and exhibits an evolution from within -plate to mid -ocean-
ridge-type volcanism. The group has been divided into six formations
based on petrographic and geochemical criteria.
(Continued on next page)
===== SIDA 13 =====
10
2.1. Geological Setting, Deposit Type and Mineralisation Style Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) Describe the project geology including mineral deposit type, geological
setting and style of mineralisation.
The bottom of the group is dominated by basaltic lavas, dolerite and
locally conglomerates (Såkevaratjah Formation). This is
subsequently overlain by peridotitic to basaltic komatiites of the
Ädnamvare Formation, followed by the subaqueous -subaerial
tholeiitic basalts of the Pikse Formation.
• The district spans around 150 km by 20 km, hosting Kiruna-type Iron
Oxide Apatite (IOA) deposits, including Kiirunavaara - the world’s
largest underground iron ore mine, Malmberget, Gruvberget,
Tuolluvaara, and the Per Geijer deposits.
• The Viscaria Formation, the host formation of the Viscaria Cu -Fe
orebodies, is composed of a steeply SE -dipping, NE -SW-striking
sequence of volcanoclastic, chemical and organic sedimentary
rocks. Overlying the Viscaria Formation is the Peuravaara Formation,
composed of basaltic pillow lavas. The whole sequence has been
metamorphosed in upper greenschist to lower amphibolite facies.
The hydrothermal alteration spans over 20 km², and includes district-
wide sodic alteration, followed by widespread Fe -K-Ca±Mg
metasomatism, marked by biotite, K -feldspar, amphibole, and
magnetite alterations.
• The Viscaria deposit is situated within the now inverted former rift
basin of the crust within the northern Norrbotten area. E -W late -
orogenic crustal shortening formed major regional folds and
penetrative regional steeply dipping N-S foliation. This N-S structural
pattern controls inflections, steps and terminations in the Viscaria
Formation. The complex evolution resulted in a SE-dipping, NE-SW-
striking stratigraphy younging to the east.
• At Viscaria, the rheological heterogeneity of the rock units has led to
strain partitioning, resulting in localized bedding -parallel shear/fault
zones close to major rheological contacts and intraformational folding
with meter scale parasitic folds normall y observed within
mechanically weaker rocks; marble, talc schists and graphite schists.
• The rocks show steep to locally overturned dips close to the surface
while the dips become gentler towards the depth.
(Continued on next page)
===== SIDA 14 =====
11
2.1. Geological Setting, Deposit Type and Mineralisation Style Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) Describe the project geology including mineral deposit type, geological
setting and style of mineralisation.
• The stratigraphy is overprinted by steeply dipping reverse faults with
west side up kinematics and intraformational folds moderately
plunging to the S and SW.
• Viscaria is a copper sulfide deposit with chalcopyrite as the main
copper mineral. In the D Zone, Cu sulfides are linked to the
replacement of pyrite along magnetite grain margins. Rare
replacement of bornite in chalcopyrite also occurs. In the A and B
Zones, Cu sulfides are paragenetically associated with pyrrhotite and
pyrite which replace magnetite.
(iii) Discuss the geological model or concepts being applied in the investigation
and on the basis of which the exploration program is planned. Describe the
inferences made from this model.
• The geological model at Viscaria comprises stratabound mineralized
zones. An exploration campaign commenced in mid-2024 to test the
strike and depth extensions of these known mineralized zones
beyond the established Mineral Resources. Results from that 202 4
exploration program were incorporated into the feasibility study and
resource update published in May 2025 (available at
http://www.viscaria.com/en/).
• The drillholes reported here were planned based on the outcomes of
the 2024 and early 2025 exploration results and are designed to
further delineate the extent and continuity of mineralization identified
during that phase.
(iv) Discuss data density, distribution and reliability and whether the quality and
quantity of information are sufficient to support statements, made or
inferred, concerning the project.
• Results published here consist of 2 assayed diamond drillholes, all in
close proximity to existing declared resources. The purpose is to
further investigate the extension of the B and D Zone at depth.
===== SIDA 15 =====
12
2.1. Geological Setting, Deposit Type and Mineralisation Style Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(v) Discuss the significant minerals present in the deposit, their frequency, size
and other characteristics. These include minor and gangue minerals where
these will have an effect on the processing steps. Indicate the variability of
each important mineral within the mineral deposit.
• Mineralogy of the Viscaria Deposit is described in Table 1 for Mineral
Resource Update May 2025 (Viscaria Kiruna AB, 2025b). Other
recent articles regarding mineral characterization can be found in
Imana et al., 2023 and Tasbicen et al., 2023.
(vi) Describe the significant mineralised zones encountered on the property,
including a summary of the surrounding rock types, relevant geological
controls, and the length, width, depth, and continuity of the mineralisation,
together with a description of the type, character, and distribution of the
mineralisation
• The property hosts four principal mineralised zones: A, B, ABBA, and
D. The drillhole under review intersected the B Zone, which is hosted
predominantly in biotite-altered calcsilicate units.
• The B Zone mineralisation is characteri zed by copper sulphide
dissemination and veining, commonly occurring in bed -parallel and
cross-cutting orientations, consistent with previously logged
observations in the area (Viscaria Kiruna AB, 2025a, 2025b).
• In contrast, the A Zone exhibits similar structural controls but contains
a carbonaceous graphitic ore type, while the D Zone is hosted within
a thick carbonate unit (>15 m) showing magnetite -chalcopyrite
replacement along both margins, with localized talc and amphibole
associated with lower Cu grades.
• D Zone has elevated Fe oxide content (22 –26% of Fe hosted in
magnetite) with chalcopyrite and pyrite replacing magnetite grain
boundaries, and peripheral areas containing sparse pyrite
replacement and a low-Cu specular hematite zone near the tectonic
footwall of the marble unit.
• Both A and B Zone orebodies are generally harder and more
competent than the carbonate- and magnetite-rich D Zone.
• ABBA Zone is positioned between the A and B Zones, in the
southwestern portion of the deposit, and consists of high -grade
copper mineralisation with a lower grade envelope, hosted within
volcano-sedimentary rocks.
===== SIDA 16 =====
13
Section 3 Exploration and Drilling, Sampling Techniques and Data
3.1. Exploration Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe the data acquisition or exploration techniques and the nature,
level of detail, and confidence in the geological data used (i.e. geological
observations, remote sensing results, stratigraphy, lithology, structure,
alteration, mineralisation, hydrology, geophysical, geochemical,
petrography, mineralogy, geochronology, bulk density, potential
deleterious or contaminating substances, geotechnical and rock
characteristics, moisture content, bulk samples etc.). Confirm that data
sets include all relevant metadata, such as unique sample number,
sample mass, collection date, spatial location etc.
• The geological data for the project have been acquired through
standard exploration techniques, including detailed core logging of
lithology, structure, alteration, and mineralisation, as well as field
observations of host rock characteristics. Core sample s have been
collected systematically, with unique sample numbers, collection
dates, sample mass, and spatial location recorded for each.
Additional geological data such as bulk density, geotechnical and
rock characteristics, and moisture content have been noted where
relevant.
• Sample preparation and a ssaying have been performed at ALS
Geochemistry laboratories in Piteå. Details of the assay process are
listed in Section 3.3.
(ii) Identify and comment on the primary data elements (observation and
measurements) used for the project and describe the management and
verification of these data or the database. This should describe the following
relevant processes: acquisition (capture or transfer), validation, integration,
control, storage, retrieval and backup processes. It is assumed that data
are stored digitally but hand -printed tables with well -organized data and
information may also constitute a database.
• A custom SQL database from M-Solutions Oy is used, called M-IDIS®
Industry Data Integration System. The database downloads assay
results directly from the laboratory ALS's (see Section 3.4.(i)) cloud-
based database Webtrieve. Database is backed up daily.
(iii) Acknowledge and appraise data from other parties and reference all data
and information used from other sources. See APPENDIX 2 for references.
(iv) Clearly distinguish between data / information from the property under
discussion and that derived from surrounding properties N/A
(v) Describe the survey methods, techniques and expected accuracy of data,
including the methods for downhole surveying of drillholes. Specify the
grid system used.
• A gyroscope sensor (SPT GyroMaster ) is used for downhole
surveying. Surveys are completed by trained drilling contractors and
requested by Viscaria geologists. The grid system used is SWEREF
99 20 15.
===== SIDA 17 =====
14
3.1. Exploration Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(vi) Discuss whether the data spacing and distribution is sufficient to establish
the degree of geological and grade continuity appropriate for the
estimation procedure(s) and classifications applied.
• Drillhole spacing supports promising geological interpretations of the
B Zone and D Zone.
(vii) Present representative models and / or maps and cross sections or other
two- or three-dimensional illustrations of results, showing location of
samples, accurate drill-hole collar positions, down-hole surveys,
exploration pits, underground workings, relevant geological data, etc.
• See APPENDIX 1 for figures
(viii) Report the relationships between mineralisation widths and intercept
lengths are particularly important, the geometry of the mineralisation with
respect to the drill hole angle. If it is not known and only the down-hole
lengths are reported, confirm it with a clear statement to this effect (e.g.
down-hole length, true width not known’).
• Down-hole lengths are given only, rather than true width calculations.
• Drill holes are nominally planned to intersect the target mineralization
with a perpendicular angle. Directional drilling has been utilized also
to ensure adequate intersection angles (i.e., to avoid drilling along
mineralization, rather than through it).
3.2. Drilling Techniques
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Present the type of drilling undertaken (e.g. core, reverse circulation,
open-hole hammer, rotary air blast, auger, Banka, sonic, etc.) and details
(e.g. core diameter, triple or standard tube, depth of diamond tails, face-
sampling bit or other type, whether core is oriented and if so, by what
method, etc.).
• All drilling undertaken is standard tube diamond drilling. Cores are
NQ2 size (50 mm diameter, measured with calipers regularly during
logging). Directional drilling has been used to ensure drilling hits the
planned targets. Directional drilling core has a diameter of 40.7 mm.
All core, excluding sections where directional drilling is done, is
oriented by the drillers where possible.
(ii) Describe whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate Mineral
Resource estimation, technical studies, mining studies and metallurgical
studies.
N/A
(iii) Describe whether logging is qualitative or quantitative in nature; indicate if
core photography. (or costean, channel, etc.) was undertaken
• Logging is qualitative. All cores are photographed dry and wet.
(iv) Present the total length and percentage of the relevant intersections
logged.
• Geological and geotechnical logging has been completed for 2543
meters of drillcore (VDD24036, VDD25013 D, VDD 24115B). Of
these, 2229 meters have undergone geochemical sampling. See
Appendix 2 for full sample lists and weighted average grades for
significant intercepts.
• VDD25013E results will be reported when received and validated.
===== SIDA 18 =====
15
3.2. Drilling Techniques Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(v) Discuss the results of any downhole surveys of the drill holes. • Deviation surveys are regularly carried out during drilling and at the
end of hole to monitor the drilling trajectory.
• BHEM surveys are also routinely conducted as part of the exploration
program. Results were used to plan further drilling.
3.3. Sample Method, Collection, Capture, and Storage
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe the nature and quality of sampling (e.g. cut channels, random
chips, or specific specialised industry standard measurement tools
appropriate to the minerals under investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc.). T hese examples should not
be taken as limiting the broad meaning of sampling.
• Drillhole cut channels are used. Handheld XRF instruments were
occasionally used to assist in preliminary estimation of Cu content or
to identify minerals.
(ii) Describe the sampling processes, including sub -sampling stages to
maximize representivity of samples. This should include whether sample
sizes are appropriate to the grain size of the material being sampled.
Indicate whether sample compositing has been applied.
• For sampling process, see Section 3.4.(iii)
• Sample compositing has not been applied.
(iii) Appropriately describe each data set (e.g. geology, grade, density, quality,
diamond breakage, geo -metallurgical characteristics etc.), sample type,
sample-size selection and collection methods
• For grade samples, see Section 3.4.(iii)
• For density samples, see Sections 3.7.(i) and 3.7.(iv)
(iv) Report the geometry of the mineralisation with respect to the drill -hole
angle. State whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which this is known,
considering the Mineral deposit type. State if the intersection angle is not
known and only the downhole lengths are reported.
• Drillhole is designed to intersect with a perpendicular angle and
usually southeast-dipping mineralization. Where drillcore is oblique
to mineralisation orientation, cutting line was used to ensure a more
representative sample.
(v) Describe retention policy and storage of physical samples (e.g. core,
sample reject, etc.)
• All core (sampled and non-sampled) will be placed in a storage tent.
Pulps and rejects will be returned from lab and will be stored in library
at the Core Shed.
(vi) Describe the method of recording and assessing core and chip sample
recoveries and results assessed, measures taken to maximise sample
recovery and ensure representative nature of the samples and whether a
relationship exists between sample recovery and grade and whether
sample bias may have occurred due to preferential loss/gain of
fine/coarse material.
• Total Core Recovery (TCR) and Rock Quality Designation (RQD) are
measured for all cores. Drillers report core loss measured after every
run. Drillers reports are compared to TCR. Where core loss
(according to TCR) exceeds 0.3 m sample intervals are not extended
across the incomplete section.
(Continued on next page)
===== SIDA 19 =====
16
3.3. Sample Method, Collection, Capture, and Storage Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(vi) Describe the method of recording and assessing core and chip sample
recoveries and results assessed, measures taken to maximise sample
recovery and ensure representative nature of the samples and whether a
relationship exists between sample recovery and grade and whether
sample bias may have occurred due to preferential loss/gain of
fine/coarse material.
• Where core cannot be assayed, results are diluted with 0 grade
material in grade calculations. As such, where grade is reported
across an interval with core loss, Cu and Fe content is
underestimated. Core loss in the reported intersections is minimal.
(vii) If a drill-core sample is taken, state whether it was split or sawn and whether
quarter, half or full core was submitted for analysis. If a non -core sample,
state whether the sample was riffled, tube sampled, rotary split etc. and
whether it was sampled wet or dry. The impact of water table or flow rates
on recovery and introduction of sampling biases or contamination from
above.
Discuss the impact of variable hole diameters, e.g., by the use of a caliper
tool.
• Core is sawn and half core is analyzed. Hole diameter is very
consistent.
(viii) If a drill-core sample is taken, sufficient information should be supplied to
assess the effects of core loss. Occasionally, only total core recovery is
mentioned but at the same time the mineralized parts are designated as
poor quality. This type of repor ting is against the main principles of
Transparency and Materiality. Heavy core losses throughout an ore body
intersection can seriously undermine the confidence in a resource estimate.
It is important to determine whether a relationship exists between grade and
recovery (either positive or negative) to assess the potential for grade bias.
In addition, it is important to state the method used to determine the core
recovery: Total Core Recovery (TCR), Solid Core Recovery (SCR) and
Rock Quality Designation (RQD).
• Core recovery is determined using TCR. TCR and RQD are
collected for the full drillhole. Average recovery of the three logged
drillholes was 97%. Average RQD was 89%. For handling of core
loss, see Section 3.3.(vi).
3.4. Sample Preparation and Analysis
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Identify the laboratory(s) and state the accreditation status and Registration
Number of the laboratory or provide a statement that the laboratories are
not accredited. Record the steps taken by the Competent Person to ensure
the results from a non-accredited laboratory are of an acceptable quality.
• Sample preparation and assaying were performed at ALS
Geochemistry laboratories in Piteå, Sweden and Loughrea, Ireland,
respectively.
===== SIDA 20 =====
17
3.4. Sample Preparation and Analysis Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) Identify the analytical method. Discuss the nature, quality and
appropriateness of the assaying and laboratory processes and procedures
used and whether the technique is considered partial or total.
• Multielement method ME-MS61 has been utilized. It is considered
appropriate for the mineralisation at Viscaria.
(iii) Describe the process and method used for sample preparation, sub-
sampling and size reduction, and the likelihood of inadequate or non-
representative samples (i.e. improper size reduction, contamination,
screen sizes, granulometry, mass balance, etc.)
• Sample interval boundaries are marked by geologists. Cores are then
transported via courier to ALS, Piteå using Chain of Custody
procedure. Diamond drill core is sawn longitudinally and split in half
for sampling. Sample preparation procedures are appropri ate, with
ALS preparing samples by crushing to <2 mm, splitting using a riffle
splitter, the pulverizing to achieve a 250 g sample mass that is sub -
sampled for analysis. Sample sizes have varied according to the
length of core sample taken as determined by geological logging.
Sample lengths are appropriate for the intersected mineralization and
minimum core diameters are greater than the maximum
mineralisation crystal size. Pulverizing of crush materials is
acceptable under the quality standard by ALS. ALS ships the
sampled half-core, pulp and reject material via courier to Viscaria
Kiruna AB, where pulps are stored in a dry and heated library and the
half-core and rejects are stored in cold facilities for later use and/or
review. (Viscaria AB, 2025b)
3.5. Sampling Governance
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Discuss the governance of the sampling campaign and process, to ensure
quality and representivity of samples and data, such as sample recovery,
high grading, selective losses or contamination, core/hole diameter,
internal and external QA/QC, and any other factors that may have
resulted in or identified sample bias.
• The sampling campaign has been conducted under standard site
procedures to ensure representivity and data integrity. Core recovery
was monitored throughout drilling, and no significant loss or high
grading was observed during logging. Core diameter and condition
were recorded to maintain consistency in sampling.
• Internal QA/QC measures, including duplicate sampling and
systematic logging, have been applied. External QA/QC protocols
will be implemented once samples are submitted for assay. QA/QC
validation is not yet complete for drillholes with assays pending .
However, the procedures followed provide confidence that the
collected geological data accurately represent the mineralisation
style and host lithologies.
===== SIDA 21 =====
18
3.5. Sampling Governance Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) Describe the measures taken to ensure sample security and the Chain of
Custody.
• Measures described by Viscaria Kiruna AB, 2025a and 2025b.
(iii) Describe the validation procedures used to ensure the integrity of the
data, e.g. transcription, input or other errors, between its initial collection
and its future use for modelling (e.g. geology, grade, density, etc.)
• Geological data collected from the drillholes have been validated
through systematic core logging and field checks to ensure accuracy
and completeness. Unique sample numbers, collection dates, spatial
locations, and sample masses have been recorded to main tain
traceability. Data entry into databases is conducted following
standard procedures, with checks to minimize transcription or input
errors. Assay results are pending, and once received, they will
undergo standard QA/QC validation, including verificatio n against
duplicates, standards, and blanks, to ensure integrity prior to use in
modelling for geology, grade, or density.
(iv) Describe the audit process and frequency (including dates of these audits)
and disclose any material risks identified. • Regular internal audits are performed by the Viscaria geology team.
3.6. Quality Control/Quality Assurance
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Demonstrate that adequate field sampling process verification techniques
(QA/QC) have been applied, e.g. the level of duplicates, blanks, reference
material standards, process audits, analysis, etc. If indirect methods of
measurement were used (e.g. geophy sical methods), these should be
described, with attention given to the confidence of interpretation. Refer to
measures taken to ensure sample representivity and the appropriate
calibration of any measurement tools or systems used. QA/QC procedures
used to check databases augmented with ‘new’ data have not resulted in
corruption of previous versions containing stored 'old' data.
• Duplicates (crush and field), blanks and standards are inserted into
sample program at a frequency of minimum 1 duplicate/blank/
standards per 10 samples.
(ii) Document the use of any independent check laboratory (umpire check
samples). Identify the independent laboratory and details of its
accreditation.
• No umpire check has been used for the results reported here.
3.7. Bulk Density
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe the method of bulk density determination with reference to the
frequency of measurements, the size, nature and representativeness of
the samples.
• Density measurements are made on whole core, with buoyancy
method, before core is sent to the lab.
(Continued on next page)
===== SIDA 22 =====
19
3.7. Bulk Density Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe the method of bulk density determination with reference to the
frequency of measurements, the size, nature and representativeness of the
samples.
• Density measurements are focused in sampled intervals, with
representative samples in non -sampled intervals. Measured core
pieces were between 10 and 30 cm. Measured bulk density ranges
from 2.81 to 3.24 g/cm³ (P10–P90), with a median of 3.01 g/cm³. The
full dataset ranges from 2.58 to 4.83 g/cm³, with values outside the
P10–P90 range representing localized zones of high-grade massive
sulphide mineralization (upper outliers) or weathered/ fractured/
porous intervals (lower outliers).
(ii) If target tonnage ranges are reported state the preliminary estimates or
basis of assumptions made for bulk density.
(iii) Discuss the representivity of bulk density samples of the material for which
a grade range is reported. N/A
(iv) Discuss the adequacy of the methods of bulk density determination for bulk
material with special reference to accounting for void spaces (vugs, porosity
etc.), moisture and differences between rock and alteration zones within the
mineral deposit.
• Porous and/or clay -rich rock are avoided as the measurement
method is not accurate for these rocks. Very low density
measurements (≤ 2.6 g/cm3) are likely due to porosity not visible to
the technician.
3.8. Bulk-Sampling and/or Trial-mining
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Indicate the location of individual samples (including map). N/A
(ii) Describe the size of samples, spacing/density of samples recovered and
whether sample sizes and distribution are appropriate to the grain size of
the material being sampled.
N/A
(iii) Describe the method of mining and treatment. N/A
(iv) Indicate the degree to which the samples are representative of the various
types and styles of mineralisation and the mineral deposit as a whole. N/A
===== SIDA 23 =====
20
Section 4 Estimation and Reporting of Exploration Results, Mineral Resources and Mineral Reserves
4.1. Geological model and interpretation Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe the geological model, construction technique and assumptions
that form the basis for the Exploration Results or Mineral Resource
estimate. Discuss the sufficiency of data density to assure continuity of
mineralisation and geology and provide an ad equate basis for the
estimation and classification procedures applied.
• Resource models are published in 2025, See
http://www.viscaria.com/en/
• No estimation or classification is reported here.
(ii) Describe the nature, detail and reliability of geological information with
which lithological, structural, mineralogical, alteration or other geological,
geotechnical and geo-metallurgical characteristics were recorded.
• Geological logging is qualitative, performed by Viscaria geologists as
well as skilled contractors. Details of data collection are described in
Section 3: Exploration and Drilling, Sampling Techniques and Data.
(iii) Describe any obvious
geological, mining,
metallurgical,
environmental, social,
infrastructural, legal
and economic factors
that could have a
significant effect on
the prospects of any
possible exploration
target or mineral
deposit.
• The report covers near -mine exploration, inside or directly adjacent
to existing exploitation concessions. There are no factors specific to
these findings.
(iv) Discuss all known geological data that could
materially influence the estimated quantity and
quality of the Mineral Resource.
N/A
(v) Discuss whether consideration was given to
alternative interpretations or models and their
possible effect (or potential risk) if any, on the
Mineral Resource estimate.
N/A
(vi) Discuss geological discounts (e.g. magnitude,
per reef, domain, etc.), applied in the model,
whether applied to mineralized and / or un -
mineralized material (e.g. potholes, faults, dykes,
etc.).
N/A
===== SIDA 24 =====
21
4.2. Estimation and modelling techniques Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe in detail the
estimation techniques
and assumptions used
to determine the grade
and tonnage ranges
for any Exploration
Targets, if reported in
a Public Report.
N/A
(ii) Discuss the nature and appropriateness of the
estimation technique(s) applied and key
assumptions, including treatment of extreme
grade values (cutting or capping), compositing
(including by length and/or density), domaining,
sample spacing, estimation unit size (block size),
selective mining units, interpolation parameters
and maximum distance of extrapolation from data
points.
N/A
(iii) Describe assumptions and justification of
correlations made between variables. N/A
(iv) Provide details of any relevant specialized
computer program (software) used, with the
version number, together with the estimation
parameters used.
N/A
(v) State the processes of checking and validation,
the comparison of model information to sample
data and use of reconciliation data, and whether
the Mineral Resource estimate takes account of
such information.
N/A
(vi) Describe the assumptions made regarding the
estimation of any co -products, by -products or
deleterious elements.
N/A
===== SIDA 25 =====
22
4.3. Reasonable prospects for eventual economic extraction Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Disclose and discuss the geological parameters.
These would include (but not be limited to)
volume / tonnage, grade and value / quality
estimates, cut-off grades, strip ratios, upper- and
lower- screen sizes.
N/A
(ii) Disclose and discuss the engineering
parameters. These would include mining
methods, dilution, processing, geotechnical,
geohydraulic and metallurgical) parameters.
N/A
(iii) Disclose and discuss the infrastructural including,
but not limited to, power, water, site-access. N/A
(iv) Disclose and discuss the legal, governmental,
permitting, statutory parameters. N/A
(v) Disclose and discuss the environmental and
social (or community) parameters. N/A
(vi) Disclose and discuss the marketing parameters. N/A
(vii) Disclose and discuss the economic assumptions
and parameters. These factors will include, but
not limited to, commodity prices and potential
capital and operating costs
N/A
(viii) Discuss any material risks N/A
(ix) Discuss the parameters used to support the
concept of "eventual" N/A
4.4. Classification Criteria
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe criteria and methods used as the basis
for the classification of the Mineral Resources
into varying confidence categories.
N/A
===== SIDA 26 =====
23
4.5. Reporting Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Discuss the reported low and high-grades and widths together with their
spatial location to avoid misleading the reporting of Exploration Results,
Mineral Resources or Mineral Reserves.
• Only exploration results are reported.
(ii) Discuss whether the
reported grades in
Exploration Targets
are regional averages
or if they are selected
individual samples
taken from the
property under
discussion.
• No exploration targets are reported.
(iii) State assumptions
regarding mining
methods,
infrastructure,
metallurgy,
environmental and
social parameters.
State and discuss
where no mining
related assumptions
have been made.
• No mining-related assumptions are made in the report.
===== SIDA 27 =====
24
4.5. Reporting Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(iv) State the specific
quantities and grades /
qualities which are
being reported in
ranges and/or widths,
and explain the basis
of the reporting
See Appendix 2
(v) Present the details for example open pit,
underground, residue stockpile, remnants,
tailings, and existing pillars or other sources in the
Mineral Resource statement
N/A
(vi) Present a reconciliation with any previous Mineral
Resource estimates. Where appropriate, report
and comment on any historical trends (e.g. global
bias).
N/A
(vii) Present the defined reference point for the
tonnages and grades reported as Mineral
Resources. State the reference point if the point
is where the run of mine material is delivered to
the processing plant. It is important that, in all
situations where the reference point is different,
such as for a saleable product, a clarifying
statement is included to ensure that the reader is
fully informed as to what is being reported.
N/A
(viii) If the CP is relying on a report, opinion, or statement of another expert
who is not a CP, disclose the date, title, and author of the report, opinion,
or statement, the qualifications of the other expert and why it is
reasonable for the CP to rely on the other expert, any significant risks and
any steps the CP took to verify the information provided.
N/A
(ix) State the basis of equivalent metal formulae, if applied. N/A
===== SIDA 28 =====
25
Section 5 Technical Studies
5.1. Introduction Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Not applicable to
Exploration Results
State the level of study
– whether Scoping,
Pre-Feasibility,
Feasibility or ongoing
Life of Mine
State the level of study
– whether Pre-
feasibility, Feasibility
or ongoing Life of
Mine. The Standard
requires that a study to
at least a Pre-
Feasibility level has
been undertaken to
convert Mineral
Resource to Mineral
Reserve. Such
studies will have been
carried out and will
include a mine plan or
production schedule
that is technically
achievable and
economically viable,
and that all Modifying
Factors have been
considered.
N/A
(ii) Not applicable to
Exploration Results
Provide a summary
table of the Modifying
Factors used to convert
the Mineral Resource
to Mineral Reserve for
Pre-feasibility,
Feasibility or on -going
Life-of-Mine studies.
N/A
===== SIDA 29 =====
26
5.2. Mining Design Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) not applicable to
Exploration Results
State assumptions
regarding mining
methods and
parameters when
estimating Mineral
Resources or explain
where no mining
assumptions have
been made.
N/A
(ii) not applicable to
Exploration Results
Discuss Modifying
factors taken into
account in estimation
of Mineral Resources
State and justify all
modifying factors and
assumptions made
regarding mining
methods, minimum
mining dimensions (or
pit shell) and internal
and, if applicable,
external) mining
dilution and mining
losses used for the
techno-economic
study and signed-off,
such as mining
method, mine design
criteria, infrastructure,
capacities, production
schedule, mining
efficiencies, grade
control, geotechnical
and hydrological
considerations, closure
plans, and personnel
requirements.
N/A
===== SIDA 30 =====
27
5.2. Mining Design Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(iii) not applicable to
Exploration Results
State what mineral resource models have been
used in the study. N/A
(iv) not applicable to
Exploration Results
State what mineral resource models have been
used in the study. N/A
(v) not applicable to
Exploration Results
Description and
justification of mining
method(s) to be used.
N/A
(vi) not applicable to
Exploration Results
For open-pit mines,
include a discussion of
pit slopes, slope
stability, and strip ratio.
N/A
(vii) not applicable to
Exploration Results
For underground
mines, discuss mining
method, geotechnical
considerations, mine
design characteristics,
and ventilation/cooling
requirements.
N/A
(viii) not applicable to
Exploration Results
Discuss mining rate,
equipment selected,
grade control methods,
geotechnical and
hydrogeological
considerations, health
and safety of the
workforce, staffing
requirements, dilution,
and recovery.
N/A
===== SIDA 31 =====
28
5.2. Mining Design Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ix) not applicable to
Exploration Results
State the optimisation
methods and any
software used in
planning, list of
constraints
(practicality, plant,
access, exposed
Mineral Reserves,
stripped Mineral
Reserves, bottlenecks,
draw control).
N/A
5.3. Metallurgical and Test work
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) not applicable to
Exploration Results
Discuss the source of the sample, the
representivity of the potential feed and the
techniques used to obtain the samples,
laboratory and metallurgical testing techniques.
N/A
(ii) not applicable to
Exploration Results
Explain the basis for assumptions or predictions
regarding metallurgical amenability and any
preliminary mineralogical test work already
carried out.
N/A
(iii) not applicable to
Exploration Results
Discuss the possible
processing methods
and any processing
factors that could have
a material effect on the
reasonable
expectations of
eventual economic
extraction. Discuss the
appropriateness of the
processing methods to
the style of
mineralisation.
Describe and justify
the processing
method(s) to be used,
equipment, plant
capacity, efficiencies,
and personnel
requirements. N/A
===== SIDA 32 =====
29
5.3. Metallurgical and Test work Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(iv) not applicable to
Exploration Results
Discuss the nature,
amount and
representativeness of
metallurgical test work
undertaken and the
recovery factors used.
A detailed flow sheet /
diagram and a mass
balance should exist
,especially for multi-
product operations
from which the
saleable materials are
priced for different
chemical and physical
characteristics.
N/A
(v) not applicable to
Exploration Results
State what
assumptions or
allowances have been
made for deleterious
elements and the
existence of any bulk-
sample or pilot-scale
test work and the
degree to which such
samples are
representative of the
ore body as a whole.
N/A
===== SIDA 33 =====
30
5.3. Metallurgical and Test work Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(vi) not applicable to
Exploration Results
State whether the
metallurgical process
is well-tested
technology or novel in
nature. If novel, justify
its use in Mineral
Reserve estimation.
N/A
5.4. Infrastructure
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) not applicable to
Exploration Results
Comment regarding the current state of
infrastructure or the ease with which the
infrastructure can be provided or accessed
N/A
(ii) not applicable to
Exploration Results
Report in sufficient
detail to demonstrate
that the necessary
facilities have been
allowed for (which may
include, but not be
limited to, processing
plant, tailings dam,
leaching facilities,
waste dumps, road,
rail or port facilities,
water and power
supply, offices,
housing, security,
resource sterilisation
testing etc.). Provide
detailed maps showing
locations of facilities.
N/A
===== SIDA 34 =====
31
5.4. Infrastructure Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(iii)
Statement showing
that all necessary
logistics have been
considered.
N/A
5.5. Environmental, Social Performance, and Governance
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) General:
- Confirm that the company or reporting entity
has addressed the host country environmental
legal compliance requirements and any
mandatory and/or voluntary standards or
guidelines to which it subscribes
- Identify the necessary permits that will be
required and their status and where not yet
obtained, confirm that there is a reasonable
basis to believe that all permits required for the
project will be obtained
- Identify and discuss any sensitive areas that
may affect the project as well as any other
environmental factors including Interested and
Affected Parties ( I&AP) and/or studies that
could have a material effect on the likelihood of
eventual economic extraction. Discuss possible
means of mitigation.
- Identify any legislated social management
programmes that may be required and discuss
the content and status of these.
- Outline and quantify the material socio-
economic and cultural impacts that need to be
mitigated, and their mitigation measures and
where appropriate the associated costs.
N/A
===== SIDA 35 =====
32
5.5. Environmental, Social Performance, and Governance Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) Context: The project context is determined and described, including the
following aspects:
• The locality’s physical geography, centers of population, economic and
cultural characteristics;
• Existing land and natural resource use for economic, cultural,
recreational and conservation purposes (inclusive of environmental and
cultural sites of interest);
• Existing or historical industrial development and associated
infrastructure including mining and quarrying in the region; and
• Local governance structures and administrative bodies, their roles and
responsibilities in relation to permitting and regulations.
• Site access routes and any potential impact on environment or local
communities
• Provision of energy for activities (e.g. off-grid renewable energy, or
sourced direct from local non-renewable power grid with plans for
decarbonisation for future project if possible)
See Section 1 Project Outline and Section 2 Geological Setting, Deposit,
Mineralisation for descriptions of locality.
The Tillståndsportal (Permit Portal) available on the website for information
on permitting, regulations and existing land use. See the company's
webpage
https://www.viscaria.com/sv/tillstandsportal/
(iii) • High level
assessment of level of
water stress (e.g.
potential for drought,
flood and impact on
water quality)
• High level
assessment of
biodiversity (e.g.
endangered species
known in area)
• Associated Environmental and seasonal
constraint/ control/consent measures/modifying
factors described
• Identification of potential climate associated
risks and impacts
• Social economic and cultural constraint
/control/consent measures/ modifying factors
described
• Any sensitive areas that may affect the project
as well as any other environmental factors
including I&AP and/or studies that could have a
material effect on the likelihood of eventual
economic extraction.
• Management of project waste and anticipated
requirements for large scale infrastructure for
mine waste for future, including but not limited to
waste dumps and tailings dams.
See the company's application for an environmental permit, found in
Tillståndsportal at
https://www.viscaria.com/sv/tillstandsportal/
===== SIDA 36 =====
33
5.5. Environmental, Social Performance, and Governance Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(iv) Permits and permission: Identification of the necessary permits that will be
required and their status, and where not yet obtained, and confirmation that
there is a reasonable basis to believe that all permits required for the project
will be obtained in a timely manner. Also include any records of penalties /
fines or revoked permits complete with rationale.
All public documents relating to the permitting process can be found in
Tillståndsportal at
https://www.viscaria.com/sv/tillstandsportal/
(v) Liabilities: Describe
any known
rehabilitation activities,
liability and / or
compliance costs
• Describe the best cost estimate for closure
inclusive of environmental, social material
remaining liability and compliance costs.
• Provide a description of mechanisms in place
to address unplanned closure
• If appropriate, describe bonding obligations in
place to ensure that these liabilities can be
funded on a qualitative and quantitative basis.
All public documents relating to the permitting process can be found in
Tillståndsportal at
https://www.viscaria.com/sv/tillstandsportal/
(vi) Description of stakeholder group characteristics
Records of Community and Stakeholder relationships:
Records kept of all engagements with all stakeholders from the outset of the
project;
A grievance and/or complaints procedure established, stakeholders’
issues, concerns recorded and tracked until resolved.
All public documents relating to the permitting process can be found in
Tillståndsportal at
https://www.viscaria.com/sv/tillstandsportal/
(vii) A data management system implemented to
record and track engagements;
Provisions made for vulnerable and or
underrepresented stakeholder groups
Presence, or not of Indigenous People, if FPIC
triggered, how is this managed
N/A
(viii) Health and safety
protocols and
procedures required
for exploration target
definition inclusive of
evidence of adherence
to them and ongoing
health and safety
record.
Health and safety procedures and protocols,
including community safety and security, across
the exploration program inclusive of evidence of
adherence to them and ongoing health and
safety record
• Viscaria Kiruna AB has health and safety protocols and uses the
GRIA reporting system for systematic safety work. The company has
standard contracts quality assured by lawyers, as well as associated
basic requirements and a supplier handbook to meet requir ements
regarding corruption, bribery and other irregularities, as well as to
ensure "good suppliers" at Viscaria.
===== SIDA 37 =====
34
5.5. Environmental, Social Performance, and Governance Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ix) Opportunities for
contributing to the
local economy
identified and utilized
where appropriate.
Legislated and or voluntary social development
programs that may be required and content and
status of these.
All public documents relating to the permitting process can be found in
Tillståndsportal at
https://www.viscaria.com/sv/tillstandsportal/
(x) Material socio-economic and cultural impacts
that need to be managed, and where
appropriate the associated costs.
N/A
(xi) Description of corporate governance board structure: gender, nationality,
tenure, roles, responsibilities and process for selection of Board members,
and Board remuneration processes and procedures
• Gruvaktiebolaget Viscaria is a listed company on Nasdaq and follows
the requirements and policies of the stock exchange. The company
has been awarded by AllBrights Green List (gender equality in
leadership). See http://www.viscaria.com/en/
(xii) • Commitment to GIIP:
transparency,
diversity, commitment
to ESG described
• Corporate
commitment to social
performance
described/ provided
• Corporate
commitment to
environmental
stewardship described
/ provided
• Description of how corporate compliance is
assured and verified
• Demonstrable commitment to GIIP:
transparency, diversity, commitment to ESG
described
• Demonstrable commitment to social
performance described
• Demonstrable commitment to environmental
stewardship described
All public documents relating to the permitting process can be found in
Tillståndsportal at
https://www.viscaria.com/sv/tillstandsportal/
===== SIDA 38 =====
35
5.5. Environmental, Social Performance, and Governance Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(xiii) Integrated Risk
Management:
Description of
identified potential
modifying factors and
management actions
taken to manage them
where appropriate
• Description of proposed mitigation plans for
identified modifying factors and management
actions taken to manage them where
appropriate.
• Description of any additional risks that may
impact on the long term future of the project,
even if not deemed to be material at the current
time.
• Description of how the risk assessment
process outlined here is integrated with the
overall risk management framework for the
company as a whole.
All public documents relating to the permitting process can be found in
Tillståndsportal at
https://www.viscaria.com/sv/tillstandsportal/
5.6. Market Studies and Economic Criteria
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) not applicable to
Exploration Results
Discuss any technical
and economic factors
likely to influence the
prospect of economic
extraction.
Describe the valuable
and potentially
valuable product(s)
including suitability of
products, co-products
and by products to
market.
N/A
===== SIDA 39 =====
36
5.6. Market Studies and Economic Criteria Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) not applicable to
Exploration Results
Discuss any technical
and economic factors
likely to influence the
prospect of economic
extraction.
Describe product to be
sold, customer
specifications, testing,
and acceptance
requirements. Discuss
whether there exists a
ready market for the
product and whether
contracts for the sale
of the product are in
place or expected to
be readily obtained.
Present price and
volume forecasts and
the basis for the
forecast.
N/A
(iii) not applicable to
Exploration Results
Discuss any technical
and economic factors
likely to influence the
prospect of economic
extraction.
State and describe all
economic criteria that
have been used for the
study such as capital
and operating costs,
exchange rates,
revenue / price curves,
royalties, cut-off
grades, reserve pay
limits.
N/A
===== SIDA 40 =====
37
5.6. Market Studies and Economic Criteria Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(iv)
not applicable to
Exploration Results
Discuss any technical
and economic factors
likely to influence the
prospect of economic
extraction.
Summary description,
source and confidence
of method used to
estimate the
commodity price/value
profiles used for cut-off
grade calculation,
economic analysis and
project valuation,
including applicable
taxes, inflation indices,
discount rate and
exchange rates.
N/A
(v)
not applicable to
Exploration Results
Discuss any technical
and economic factors
likely to influence the
prospect of economic
extraction.
Present the details of
the point of reference
for the tonnages and
grades reported as
Mineral Reserves (e.g.
material delivered to
the processing facility
or saleable product(s)).
It is important that, in
any situation where the
reference point is
different, a clarifying
statement is included
to ensure that the
reader is fully informed
as to what is being
reported.
N/A
===== SIDA 41 =====
38
5.6. Market Studies and Economic Criteria Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(vi) Justify assumptions
made concerning
production cost
including
transportation,
treatment, penalties,
exchange rates,
marketing and other
costs. Provide details
of allowances that are
made for the content of
deleterious elements
and the cost of
penalties.
N/A
(vii) Provide details of
allowances made for
royalties payable, both
to Government and
private.
N/A
(viii) State ownership, type,
extent and condition of
plant and equipment
that is significant to the
existing operation(s).
N/A
(ix) Provide details of all
environmental, social
and labour costs
considered
N/A
===== SIDA 42 =====
39
5.7. Risk Analysis Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) A high-level
assessment should be
made of key areas of
uncertainty which may
affect exploration
outcomes. An
assessment should be
provided on the
chances of exploration
success, together with
consideration of any
potential threats, such
as ESG aspects,
which could hinder
eventual development
of a mining or
extraction project in
the exploration area.”
Report an assessment of technical,
environmental, social, economic, political and
other key risks to the project. Describe actions
that will be taken to mitigate and/or manage the
identified risks.
• This report concerns near -mine exploration, within or directly
adjacent to existing exploitation concessions. The main risk is the
lack of sufficient data to declare exploration targets and mineral
resources.
• The increasing depth of the deposit introduces risks related to mining
operations at deep levels. These include higher mining costs as well
as effects on in situ stress on the rock mass, higher temperature and
water pressure. The exploration results fall within the current analysis
for the mining operation, due to their spatial proximity to declared
mineral resources.
5.8. Economic Analysis
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) not applicable to
Exploration Results
Describe the basis on
which reasonable
prospects for eventual
economic extraction
have been
determined, including
any material
assumptions made in
determining the
‘reasonable prospects
for eventual economic
extraction’.
State and justify the
inclusion of any
Inferred Resources in
the Pre-feasibility and
Feasibility Studies
economic analysis.
Report the sensitivity
to the inclusion of any
Inferred Resources.
N/A
===== SIDA 43 =====
40
5.8. Economic Analysis Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(ii) not applicable to
Exploration Results
At the relevant level (Scoping Study, Pre-
feasibility, Feasibility or on-going Life-of Mine),
provide an economic analysis for the project that
includes:
N/A
(iii) not applicable to
Exploration Results
Cash Flow forecast on an annual basis using
Mineral Reserves or an annual production
schedule for the life of the project
N/A
(iv) not applicable to
Exploration Results
A discussion of net present value (NPV), internal
rate of return (IRR) and payback period of
capital
N/A
(v) not applicable to
Exploration Results
Sensitivity or other analysis using variants in
commodity price, grade, capital and operating
costs, or other significant parameters, as
appropriate and discuss the impact of the
results.
N/A
===== SIDA 44 =====
41
Section 6 Estimation and Reporting of Mineral Reserves
6.1. Estimation and Modelling Techniques Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) not applicable to
Exploration Results
Describe the Mineral Resource estimate used
as a basis for the conversion to a Mineral
Reserve.
N/A
(ii) not applicable to
Exploration Results
Report the Mineral Reserve Statement with
sufficient detail indicating if the mining is open
pit or underground plus the source and type of
mineralisation, domain or ore body, surface
dumps, stockpiles and all other sources.
N/A
(iii) not applicable to
Exploration Results
If Inferred resources
are used in assessing
Mineral reserves, then
report and discuss a
comparison between
the two possibilities,
the one with inclusion
of Inferred Mineral
Resources and the one
without inclusion, in
such a way so as not to
mislead the inv estors.
Identify the quantity of
the Inferred Mineral
Resources included
and the sensitivity of
the inclusion to the
study.
N/A
===== SIDA 45 =====
42
6.1. Estimation and Modelling Techniques Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(iv) not applicable to
Exploration Results
A Mineral Reserve
Statement in sufficient
detail indicating if the
mining is open pit or
underground plus the
source and type of
mineralisation ,
domain or ore body,
surface dumps,
stockpiles and all other
sources.
N/A
(v) not applicable to
Exploration Results
Provide a
reconciliation
reporting historic
reliability of the
performance
parameters,
assumptions and
modifying factors
including a comparison
with the previous
Reserve quantity and
qualities, if available.
Where appropriate,
report and comment
on any historic trends
(e.g. global bias)
N/A
===== SIDA 46 =====
43
6.2. Classification Criteria Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Describe and justify
criteria and methods
used as the basis for
the classification of the
Mineral Reserves into
varying confidence
categories, based on
the Mineral Resource
category, and including
consideration of the
confidence in all the
modifying factors.
N/A
6.3. Reporting
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Discuss the proportion
of Probable Mineral
Reserves, which have
been derived from
Measured Mineral
Resources (if any),
including the reason(s)
therefore.
N/A
(ii) Present details of for
example open pit,
underground, residue
stockpile, remnants,
tailings, and existing
pillars or other sources
in respect of the
Mineral Reserve
statement
N/A
===== SIDA 47 =====
44
6.3. Reporting Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(iii) Present the details of
the defined reference
point for the Mineral
Reserves. State where
the reference point is
the point where the run
of mine material is
delivered to the
processing plant. It is
important that, in all
situations where the
reference point is
different, such as for a
saleable product, a
clarifying statement is
included to ensure that
the reader is fully
informed as to what is
being reported. State
clearly whether the
tonnages and grades
reported for Mineral
Reserves are in
respect of materi al
delivered to the plant or
after recovery.
N/A
(iv) Present a
reconciliation with the
previous Mineral
Reserve estimates.
Where appropriate,
report and comment on
any historic trends (e.g.
global bias).
N/A
===== SIDA 48 =====
45
6.3. Reporting Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(v) Confirm that only
Measured and
Indicated Mineral
Resources can be
considered for
inclusion in the Mineral
Reserve.
N/A
(vi) State whether the Measured Mineral Resources
and Indicated Mineral Resources are inclusive of
or additional to the Mineral Reserves.
N/A
6.4. Specific for Metal Equivalents or Combined Grades Reporting
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Confirm that all reports comply with section 9 (paragraphs 9.1 to 9.5) of the
PERC Reporting Standard. N/A
(ii) Discuss and describe the basis for the grade
estimation for each metal relating to the metal
equivalence or combined grade
N/A
(iii) Disclose all economic criteria that have been
used for the calculation such as exchange rates,
revenue / price curves, royalties, cut -off grades,
pay limits.
N/A
(iv) Discuss the basis for assumptions or predictions
regarding metallurgical factors such as recovery
used in the metal equivalents or combined
grades calculation.
N/A
(v) Show the calculation formula used. N/A
===== SIDA 49 =====
46
Section 7 Audits and Reviews
7.1. Audits and Reviews Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) State type of review/audit (e.g. independent, external), area (e.g.
laboratory, drilling, data, environmental compliance etc.), date and name of
the reviewer(s) together with their recognized professional qualifications.
State the level of review/audit (desk-top, on-site comparison with standard
procedures, or endorsement where auditor/reviewer has checked the work
to the extent they stand behind it as if it were their own work).
• Exploration results reported here have been subject to peer audits as
described in Section 3.5.(iii).
(ii) Disclose the conclusions of relevant audits or reviews. Note where
significant deficiencies and remedial actions are required. N/A
===== SIDA 50 =====
47
Section 8 Other Relevant Information
8.1. Other Relevant Information Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) Discuss all other relevant and material information not discussed
elsewhere. N/A
===== SIDA 51 =====
48
Section 9 Qualification of Competent Person(s) and other key technical staff. Date and Signature Page
9.1. Competent Person Details Back to Table of Contents
Exploration Results Mineral Resources Mineral Reserves Competent Person’s Report (CPR)
(i) State the full name, registration number and name of the professional
body or RPO, for all the Competent Person(s). State the relevant
experience of the Competent Person(s) and other key technical staff who
prepared and are responsible for the Public Report.
• Thomas Lindholm is a member of the Fennoscandian Association
of Metals and Mining Professionals, FAMMP as well as a Fellow of
AusIMM (#230476).
• He graduated with a M.Sc. in mining engineering from the Luleå
University of Technology in 1982 and has since worked in
exploration and mine development projects in Sweden and abroad.
(ii) State the Competent Person’s relationship to the issuer of the report. • The Competent Person is independent of the company.
(iii) Provide the Certificate of the Competent Person, including the date of
sign-off and the effective date, in the Public Report. See Competent Person’s Certificate
===== SIDA 52 =====
49
APPENDIX 1: FIGURES
Table of Figures
Figure 1 Geological map of Norrbotten .......................................................................................... 50
Figure 2 Map of Viscaria’s tenures ................................................................................................. 51
Figure 3 Plan view of mineralized zone and DH traces – with DH names. .................................... 52
Figure 4 Section view of mineralized zone and DH traces – with DH names. Facing NE. ............. 53
===== SIDA 53 =====
50
Figure 1 Geological map of Norrbotten
===== SIDA 54 =====
51
Figure 2 Map of Viscaria’s tenures
===== SIDA 55 =====
52
Figure 3 Plan view of mineralized zone and DH traces – with DH names.
VDD24115B ꜝ
During preparation of the Q1 2026 Table 1, the Company identified that while final assay results for drillhole
‘VDD24115B’ were validated and incorporated into the Mineral Resource Estimate reported in the
Company's Interim Report Q1 2025 (released May 8, 2025 in accordance with the PERC Reporting
Standard), the detailed exploration results for this drillhole had not been presented as a standalone
exploration result disclosure, noting that the drillhole had previously been reported as ongoing drillhole
and assay pending in the Year-end Report Q4 2024 (See Figure 4). The Company has assessed that the
material information associated with drillhole ‘VDD24115B’ was already disclosed to the market through
its inclusion in the published Mineral Resource Estimate, which incorporated this data into the resource
model for the B Zone Deep.
For completeness, transparency, and full traceability of the data supporting Mineral Resource, the
Company has decided to formally report the detailed exploration results for drillhole VDD24115B in this
update. This disclosure does not represent new material information but provides supporting detail for
data previously included in the published Mineral Resource Statement.
===== SIDA 56 =====
53
Figure 4 Section view of mineralized zone and DH traces – with DH names. Facing NE.
===== SIDA 57 =====
54
APPENDIX 2: ASSAY RESULTS
APPENDIX 2.1: Summary
Table 1: Collar table
Zone Hole ID X Y Z Depth (m) Core size
B and D VDD24036 143934.5 7529959.15 536.3 1775.5 NQ
B VDD25013D 143873 7530039 540.3 1673.2 NQ
B VDD24115B ꜝ 143934.96 7529758.47 537.76 1392 NQ
Table 2: Selected intersections
• Ore grades are weighted by density and length with the formula:
(length×grade×density) / (length×density)
• Density measurements are focused in sampled intervals, with representative samples in non-
sampled intervals. In mineralised and ore zone samples, density measurements were made
on every sample interval. Measured core pieces were between 3 and 30 cm. Measured bulk
density ranged from 2.58 to 4.83 g/cm3.
Zone Hole ID From To Total length (m) Cu% Fe%
- VDD24036 1377.5 1393 15.5 1.15 4.04
D VDD24036 1718.9 1757.08 38.2 0.58 24.7
B VDD25013D 782.8 796.55 13.8 1.13 12.2
B VDD25013D 844 858 14 1.01 12.1
B VDD25013D 871.45 878 6.5 1.14 13.6
B VDD25013D 957.4 966 8.6 1.07 13.43
B VDD25013D 1025.6 1036.95 11.4 1.17 11.28
B VDD24115Bꜝ 1307 1328.33 21.33 1.24 9.31
B VDD24115Bꜝ 1286.9 1330.95 44.05 0.97 11.6
VDD24115B ꜝ: Assay results does not represent new material information but provides supporting detail for
data previously included in the published Mineral Resource Statement.
===== SIDA 58 =====
55
APPENDIX 2.2: Full assay results
In the drillhole tables below, CU_PCT and FE_PCT columns are thematically colour -coded based on
value ranges.
In DENSITY column pale pink-shaded values are directly assigned based on the average bulk density
of the local rock type. The remaining values, i.e., those without shading, have density values derived
from direct measurements.
In SAMPLE_ID column NO SAMPLE intervals represent unmineralised zones identified by geological
logging and not submitted for assay. Assay values shown are database placeholders, not analytical
results. Density values are assigned based on the average bulk density of the local rock type.
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
398.2 399.77 1.57 VS049422 0.002 10.25 0.04 3.02
399.77 400.96 1.19 VS049423 0.003 10.35 0.04 3.03
400.96 402.67 1.71 VS049424 0.002 9.61 0.01 2.96
402.67 404.2 1.53 VS049425 0.003 9.43 0.02 2.95
404.2 405.66 1.46 VS049426 0.02 9.28 0.13 2.95
405.66 407.1 1.44 VS049427 0.001 8.77 0.01 2.94
407.1 408.68 1.58 VS049428 0.003 8.78 0.01 2.93
408.68 409.74 1.06 VS049429 0.004 8.74 0.04 2.98
409.74 410.66 0.92 VS049430 0.007 9.15 0.07 2.97
410.66 411.81 1.15 VS049431 0.002 8.59 0.03 2.93
411.81 412.2 0.39 VS049433 0.003 9.35 0.03 2.96
412.2 413.5 1.3 VS049434 0.063 8.04 0.28 2.95
413.5 414.26 0.76 VS049435 1.29 7.88 5.13 2.91
414.26 415.34 1.08 VS049436 1.445 3.69 5.34 2.70
415.34 415.96 0.62 VS049438 0.47 2.92 1.66 2.72
415.96 416.92 0.96 VS049439 0.074 1.1 0.55 2.68
416.92 417.49 0.57 VS049440 0.182 1.66 1.52 2.76
417.49 417.86 0.37 VS049442 0.094 4.62 0.86 2.93
417.86 418.84 0.98 VS049443 0.112 11.5 0.48 3.03
418.84 420.06 1.22 VS049444 0.15 14.7 0.31 3.06
420.06 421.04 0.98 VS049445 0.052 7.65 0.09 2.89
421.04 422.03 0.99 VS049446 0.076 7.81 0.14 2.92
422.03 422.58 0.55 VS049448 0.066 10.2 0.13 2.95
422.58 424.04 1.46 VS049449 0.167 11.35 0.38 2.88
424.04 424.95 0.91 VS049450 0.121 13.95 0.26 3.16
424.95 426.23 1.28 VS049451 0.056 11.25 0.15 3.03
426.23 427.1 0.87 VS049452 0.071 10.45 0.17 3.02
427.1 428.66 1.56 VS049454 0.061 12.85 0.19 2.86
428.66 429.37 0.71 VS049455 0.043 9.15 0.13 2.90
429.37 430.59 1.22 VS049456 0.033 13.2 0.07 3.13
430.59 431.63 1.04 VS049457 0.011 9.71 0.04 3.02
431.63 432.77 1.14 VS049458 0.042 11.9 0.12 3.03
432.77 434.28 1.51 VS049459 0.035 11.6 0.09 2.93
434.28 435.76 1.48 VS049461 0.375 14.15 0.53 3.08
435.76 437.2 1.44 VS049462 0.028 10.55 0.08 2.95
===== SIDA 59 =====
56
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
437.2 438.68 1.48 VS049463 0.012 9.1 0.04 2.95
438.68 440 1.32 VS049464 0.004 8.53 0.03 2.93
440 441.33 1.33 VS049465 0.002 9.33 0.02 2.93
441.33 441.98 0.65 VS049466 0.009 10.45 0.02 3.02
441.98 443.04 1.06 VS049468 0.008 11.5 0.05 3.06
443.04 444.46 1.42 VS049469 0.007 11.3 0.03 3.07
548.44 549.73 1.29 VS049627 0.007 8.14 0.01 2.98
549.73 551 1.27 VS049628 0.029 10.15 0.06 2.96
551 552 1 VS049629 0.044 9.68 0.12 3.03
552 553.02 1.02 VS049630 0.005 9.84 0.005 2.92
553.02 554.08 1.06 VS049631 0.007 11.5 0.005 2.93
554.08 555 0.92 VS049633 0.007 9.42 0.005 2.94
555 556.32 1.32 VS049634 0.04 10.35 0.1 2.95
556.32 557.45 1.13 VS049635 0.011 7.96 0.05 2.76
557.45 558.49 1.04 VS049636 0.034 6.01 0.14 2.76
558.49 559.49 1 VS049637 0.009 6.52 0.08 2.77
559.49 560.54 1.05 VS049639 0.005 5.47 0.05 2.64
560.54 561.41 0.87 VS049640 0.003 9.47 0.01 2.89
561.41 562.27 0.86 VS049641 0.009 9.17 0.02 2.90
562.27 563.68 1.41 VS049642 0.004 5.64 0.02 2.82
563.68 564.7 1.02 VS049643 0.002 9.89 0.005 2.89
564.7 566 1.3 VS049644 0.009 9.76 0.02 2.93
566 567.22 1.22 VS049646 0.006 10.3 0.01 2.93
567.22 568.59 1.37 VS049647 0.009 10.25 0.01 2.95
568.59 570.04 1.45 VS049648 0.006 10.8 0.02 2.97
570.04 571.13 1.09 VS049649 0.023 12.15 0.11 2.99
571.13 572.35 1.22 VS049650 0.009 11.15 0.02 3.01
572.35 573.61 1.26 VS049652 0.007 11.05 0.005 3.04
573.61 575 1.39 VS049653 0.003 12.1 0.005 3.02
575 576.32 1.32 VS049654 0.004 11.3 0.005 3.01
576.32 577.55 1.23 VS049655 0.011 10.55 0.04 2.99
577.55 578.74 1.19 VS049656 0.022 10.05 0.1 2.91
578.74 579.97 1.23 VS049658 0.008 10.85 0.02 3.01
579.97 581.3 1.33 VS049659 0.041 11.65 0.2 3.01
581.3 582.53 1.23 VS049660 0.012 10.4 0.08 3.03
582.53 583.72 1.19 VS049661 0.016 11.1 0.16 3.05
583.72 585 1.28 VS049662 0.008 11.05 0.11 3.02
585 586 1 VS049663 0.16 10.65 0.97 3.03
586 587.08 1.08 VS049665 0.026 11.55 0.28 3.03
637.06 638.1 1.04 VS049666 0.016 9.75 0.08 3.04
638.1 639.16 1.06 VS049667 0.008 9.07 0.07 2.97
639.16 640.11 0.95 VS049668 0.002 7.37 0.02 2.93
640.11 641.23 1.12 VS049669 0.013 4.44 0.07 2.95
641.23 642.27 1.04 VS049670 0.003 3.47 0.05 2.69
642.27 643.44 1.17 VS049672 0.035 5.41 0.24 2.67
643.44 644.04 0.6 VS049673 0.035 10.95 0.54 3.03
644.04 645 0.96 VS049674 0.013 5.41 0.06 2.78
===== SIDA 60 =====
57
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
645 645.71 0.71 VS049675 0.059 7.7 0.42 2.80
645.71 646.34 0.63 VS049676 0.003 6.99 0.06 2.76
646.34 647.55 1.21 VS049678 0.029 12.4 0.27 2.95
647.55 648.86 1.31 VS049679 0.01 10.7 0.07 3.00
648.86 650 1.14 VS049680 0.006 6.63 0.05 3.02
650 651.15 1.15 VS049681 0.011 8.88 0.04 3.00
651.15 652.52 1.37 VS049682 0.005 8.48 0.06 2.80
652.52 653.79 1.27 VS049683 0.01 9.22 0.06 2.84
653.79 655 1.21 VS049685 0.014 9.58 0.06 2.86
655 656.3 1.3 VS049686 0.032 8.94 0.15 3.14
656.3 657.71 1.41 VS049687 0.051 7.37 0.3 2.79
657.71 659.1 1.39 VS049688 0.067 12.4 0.24 3.01
659.1 660.13 1.03 VS049689 0.02 10.25 0.09 2.90
660.13 661.37 1.24 VS049691 0.018 9.44 0.1 2.88
661.37 662.45 1.08 VS049692 0.074 11.9 0.5 2.94
662.45 663.51 1.06 VS049693 0.012 11.4 0.06 2.85
663.51 664.6 1.09 VS049694 0.01 11.45 0.04 2.91
664.6 665.83 1.23 VS049695 0.011 8.93 0.08 2.81
665.83 667 1.17 VS049697 0.009 10.05 0.01 3.16
667 668.33 1.33 VS049698 0.007 10.65 0.02 2.97
668.33 669.66 1.33 VS049699 0.002 11.05 0.01 2.91
669.66 670.14 0.48 VS049700 0.076 13.25 0.32 3.10
670.14 670.86 0.72 VS049701 0.026 9.07 0.08 2.93
670.86 671.75 0.89 VS049702 0.007 9.7 0.03 3.23
671.75 672.35 0.6 VS049704 0.032 10.1 0.06 2.94
672.35 672.93 0.58 VS049705 0.091 11.05 0.09 2.88
672.93 673.62 0.69 VS049706 0.025 10.05 0.09 2.89
673.62 674.89 1.27 VS049707 0.017 9.49 0.03 3.01
674.89 676.48 1.59 VS050057 0.005 10.25 0.03 3.00
676.48 677.16 0.68 VS050058 0.05 10.3 0.26 3.00
677.16 679.66 2.5 VS050059 0.013 8.53 0.04 3.00
679.66 682.12 2.46 VS050060 0.04 8.64 0.08 3.00
682.12 683.73 1.61 VS050061 0.005 9.66 0.01 3.00
683.73 685.18 1.45 VS050063 0.005 9.23 0.01 3.00
685.18 687.59 2.41 VS050064 0.002 9.17 0.01 3.00
687.59 690 2.41 VS050065 0.01 9.31 0.05 3.00
690 692.35 2.35 VS050066 0.004 9 0.02 3.00
692.35 694.72 2.37 VS050067 0.006 8.62 0.04 3.00
694.72 695.88 1.16 VS050068 0.128 10.3 0.32 3.00
695.88 697.79 1.91 VS050070 0.013 10 0.11 3.00
797.66 799.1 1.44 VS050071 0.169 12 0.37 3.00
799.1 800.54 1.44 VS050072 0.031 12 0.04 3.00
800.54 801.97 1.43 VS050073 0.018 12.3 0.06 3.00
801.97 803.42 1.45 VS050074 0.01 11.55 0.09 3.00
803.42 804.86 1.44 VS050075 0.018 10.6 0.05 3.00
804.86 806.32 1.46 VS050076 0.046 11.7 0.28 3.00
806.32 807.74 1.42 VS050078 0.003 10.15 0.02 3.00
===== SIDA 61 =====
58
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
807.74 809.2 1.46 VS050079 0.023 10.95 0.14 3.00
823.73 824.89 1.16 VS048971 0.016 10.9 0.05 3.00
824.89 826.05 1.16 VS048972 0.008 10.7 0.01 3.00
839.72 841.11 1.39 VS048973 0.013 11.2 0.02 3.00
841.11 842.5 1.39 VS048974 0.011 11.4 0.03 3.00
842.5 843.89 1.39 VS048975 0.009 11.25 0.04 3.00
843.89 845.28 1.39 VS048976 0.019 11.05 0.02 3.00
845.28 846.67 1.39 VS048977 0.017 11 0.02 3.00
846.67 848.06 1.39 VS048978 0.008 11.85 0.02 3.00
848.06 849.21 1.15 VS048979 0.03 11 0.05 3.00
849.21 850.36 1.15 VS048981 0.091 11.45 0.12 3.00
864.94 865.28 0.34 VS048982 0.078 10.7 0.06 3.00
865.28 866.4 1.12 VS048983 0.043 11.4 0.03 3.00
866.4 867.52 1.12 VS048984 0.04 11.95 0.08 3.00
867.52 868.64 1.12 VS048985 0.019 11.3 0.07 3.00
879.08 880.2 1.12 VS048986 0.014 12.85 0.05 3.00
880.2 881.32 1.12 VS048987 0.026 12.5 0.06 3.00
881.32 882.46 1.14 VS048988 0.041 13.6 0.07 3.00
882.46 883.76 1.3 VS048989 0.022 12.5 0.04 3.00
883.76 885.18 1.42 VS048990 0.138 19.2 0.44 3.00
885.18 886.6 1.42 VS048992 0.067 13.5 0.22 3.00
886.6 888.02 1.42 VS048993 0.194 15.2 1.1 3.00
888.02 889.44 1.42 VS048994 0.272 17.5 0.9 3.00
889.44 890.86 1.42 VS048995 0.152 18.2 0.62 3.00
890.86 892.28 1.42 VS048996 0.1 17.65 0.41 3.00
892.28 893.53 1.25 VS048998 0.01 11.7 0.04 3.00
893.53 894.78 1.25 VS048999 0.006 11.3 0.02 3.00
894.78 895.98 1.2 VS049000 0.024 8.02 0.04 3.00
895.98 897.49 1.51 VS049001 0.023 12.9 0.06 3.00
897.49 899 1.51 VS049002 0.064 13.95 0.35 3.00
899 900.34 1.34 VS049003 0.014 13.85 0.1 3.00
900.34 901.68 1.34 VS049004 0.007 12.25 0.03 3.00
901.68 903.03 1.35 VS049005 0.004 11.75 0.01 3.00
903.03 904.3 1.27 VS049007 0.296 13.85 0.92 3.00
904.3 905.57 1.27 VS049008 0.324 12.8 0.76 3.00
905.57 906.87 1.3 VS049009 0.09 15.85 0.12 3.00
906.87 908.14 1.27 VS049010 0.079 15.05 0.17 3.00
908.14 909.47 1.33 VS049011 0.03 10.75 0.08 3.00
909.47 910.66 1.19 VS049012 0.07 12.1 0.2 3.00
910.66 913 2.34 VS049013 0.044 12.75 0.09 3.00
929.6 930.83 1.23 VS049014 0.019 14.7 0.05 3.04
930.83 932.06 1.23 VS049015 0.02 13.9 0.04 3.05
932.06 933.29 1.23 VS049017 0.018 14.1 0.04 3.04
933.29 934.54 1.25 VS049018 0.008 14.55 0.02 3.06
934.54 935.77 1.23 VS049019 0.024 14.3 0.05 3.05
935.77 937.03 1.26 VS049020 0.028 14.9 0.08 3.06
937.03 938.39 1.36 VS049021 0.093 12.7 0.24 3.03
===== SIDA 62 =====
59
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
938.39 939.75 1.36 VS049022 0.016 14.9 0.04 3.07
939.75 941.11 1.36 VS049023 0.025 13.6 0.07 2.95
941.11 942.48 1.37 VS049024 0.016 14.05 0.05 2.92
942.48 943.63 1.15 VS049025 0.112 14.65 0.27 3.01
943.63 944.78 1.15 VS049027 0.016 14.75 0.06 3.05
944.78 945.93 1.15 VS049028 0.11 14.6 0.3 2.92
945.93 947.08 1.15 VS049029 0.071 14.75 0.16 2.89
947.08 948.23 1.15 VS049030 0.004 16.25 0.01 3.08
948.23 949.38 1.15 VS049031 0.012 14.6 0.05 2.99
949.38 950.53 1.15 VS049032 0.092 16.3 0.22 3.04
950.53 951.7 1.17 VS049033 0.034 15.1 0.07 3.06
951.7 952.71 1.01 VS049034 0.138 22.4 0.36 3.59
952.71 953.72 1.01 VS049036 0.361 27.7 0.94 3.52
953.72 954.87 1.15 VS049037 0.181 17.15 0.36 3.19
954.87 956.02 1.15 VS049038 0.174 22 0.57 3.20
956.02 957.17 1.15 VS049039 0.338 24.6 0.47 3.25
957.17 958.32 1.15 VS049040 0.388 24.9 0.56 3.08
958.32 959.47 1.15 VS049041 0.145 21.1 0.29 3.24
959.47 960.62 1.15 VS049043 0.149 22.8 0.37 3.11
960.62 961.82 1.2 VS049044 0.255 20.2 0.44 3.42
961.82 962.86 1.04 VS049045 0.036 14.95 0.07 3.12
962.86 963.9 1.04 VS049046 0.016 14.35 0.03 2.92
963.9 964.94 1.04 VS049047 0.529 26.8 0.93 3.59
964.94 966.09 1.15 VS049049 0.01 13.2 0.03 3.01
966.09 967.24 1.15 VS049050 0.008 13.2 0.01 3.08
967.24 968.4 1.16 VS049051 0.01 13.2 0.03 3.04
968.4 969.43 1.03 VS049052 0.006 13.65 0.01 3.04
969.43 970.46 1.03 VS049053 0.029 14.35 0.04 3.03
970.46 971.5 1.04 VS049054 0.034 12.6 0.07 3.00
971.5 972.7 1.2 VS049055 0.021 13.2 0.05 3.00
972.7 973.9 1.2 VS049056 0.007 14.3 0.02 3.09
973.9 975.1 1.2 VS049057 0.084 14.35 0.19 3.04
975.1 976.3 1.2 VS049059 0.07 12.75 0.17 3.05
976.3 977.5 1.2 VS049060 0.009 13.1 0.03 3.00
977.5 978.74 1.24 VS049061 0.02 13.9 0.12 3.04
978.74 979.62 0.88 VS049062 0.06 14.3 0.14 3.02
979.62 980.5 0.88 VS049063 0.159 15.5 0.38 3.23
980.5 981.72 1.22 VS049065 0.042 13.2 0.12 3.03
981.72 982.94 1.22 VS049066 0.092 13.05 0.27 2.96
982.94 984.09 1.15 VS049067 0.039 10.25 0.14 2.87
984.09 985.24 1.15 VS049068 0.071 12.65 0.13 2.77
985.24 986.4 1.16 VS049069 0.043 10 0.1 2.83
986.4 987.65 1.25 VS049070 0.056 8.65 0.17 2.96
987.65 988.9 1.25 VS049071 0.007 6.66 0.04 2.92
988.9 989.92 1.02 VS049072 0.009 9.95 0.05 2.92
989.92 990.94 1.02 VS049073 0.018 11.1 0.07 2.90
990.94 991.96 1.02 VS049075 0.033 11.1 0.1 2.88
===== SIDA 63 =====
60
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
991.96 993 1.04 VS049076 0.072 12.7 0.19 2.97
993 994.28 1.28 VS049077 0.015 12.15 0.03 2.93
994.28 995.56 1.28 VS049078 0.029 12.7 0.04 2.95
995.56 996.84 1.28 VS049079 0.013 12.3 0.03 2.99
996.84 998.12 1.28 VS049080 0.007 11.65 0.04 2.95
998.12 999.41 1.29 VS049081 0.062 10 0.13 2.93
999.41 1000.51 1.1 VS049082 0.214 24.2 0.73 3.26
1000.51 1001.62 1.11 VS049083 0.2 17.95 0.78 3.29
1001.62 1002.7 1.08 VS049085 0.108 16.4 0.35 2.99
1002.7 1003.82 1.12 VS049086 0.432 23.6 1.26 3.57
1003.82 1005.05 1.23 VS049088 0.04 12.7 0.1 2.93
1005.05 1006.28 1.23 VS049089 0.001 10.25 0.01 2.87
1006.28 1007.52 1.24 VS049090 0.001 11 0.005 2.88
1007.52 1008.75 1.23 VS049091 0.006 8.7 0.03 2.74
1008.75 1009.98 1.23 VS049092 0.104 11.9 0.27 2.91
1009.98 1011.23 1.25 VS049093 0 12.45 0.01 2.88
1011.23 1012.44 1.21 VS049094 0 13.7 0.005 2.98
1012.44 1013.67 1.23 VS049095 0.017 13.95 0.04 3.11
1013.67 1014.9 1.23 VS049096 0.003 12.75 0.03 3.16
1014.9 1016.13 1.23 VS049098 0.001 11.75 0.03 2.97
1016.13 1017.4 1.27 VS049099 0.002 10.95 0.02 2.93
1017.4 1019.06 1.66 VS049100 0.013 13.55 0.05 3.09
1019.06 1020.72 1.66 VS049101 0.001 12.35 0.01 3.02
1020.72 1022.38 1.66 VS049102 0 10.85 0.01 2.92
1022.38 1024.04 1.66 VS049103 0.01 11.65 0.05 2.98
1024.04 1026.09 2.05 VS049104 0.003 11.9 0.01 2.95
1026.09 1028.14 2.05 VS049105 0.003 12.55 0.01 2.95
1028.14 1030.2 2.06 VS049106 0.003 10.55 0.03 2.95
1030.7 1032.83 2.13 VS049108 0.013 11.6 0.04 2.95
1032.83 1034.94 2.11 VS049109 0.002 11.5 0.05 2.95
1034.94 1037.1 2.16 VS049110 0.07 10.45 0.38 2.95
1037.1 1039.85 2.75 VS074661 0.043 11.25 0.17 2.97
1039.85 1042.8 2.95 VS074662 0.092 9.65 0.24 2.95
1042.8 1045.8 3 VS074663 0.006 9.33 0.05 2.95
1045.8 1047.8 2 VS074664 0.004 9.43 0.03 2.95
1047.8 1048.9 1.1 VS074665 0.052 9.49 0.13 2.95
1048.9 1051.5 2.6 VS074666 0.001 10.25 0.03 2.95
1051.5 1053.8 2.3 VS074667 0.005 9.41 0.04 2.91
1053.8 1056.1 2.3 VS074668 0.005 10.3 0.03 2.95
1056.1 1059 2.9 VS074669 0.051 12 0.23 2.95
1059 1061 2 VS074670 0.082 13.1 0.53 2.95
1061 1063.4 2.4 VS074672 0.017 11.3 0.05 2.95
1063.4 1065.85 2.45 VS074673 0.019 11.15 0.07 2.95
1065.85 1067.8 1.95 VS074674 0.001 10.55 0.005 2.98
1067.8 1070.7 2.9 VS074675 0.046 11.1 0.08 2.95
1070.7 1072.9 2.2 VS074676 0.002 10.95 0.06 2.95
1072.9 1074.2 1.3 VS074677 0.002 10.7 0.005 2.95
===== SIDA 64 =====
61
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1074.2 1075.8 1.6 VS074678 0.019 11.95 0.21 2.95
1075.8 1077.2 1.4 VS074679 0.001 10 0.02 2.95
1077.2 1078.5 1.3 VS074680 0.039 11.75 0.17 2.96
1078.5 1080.2 1.7 VS074681 0.022 10.6 0.08 2.95
1080.2 1081.5 1.3 VS074683 0.065 11.2 0.27 2.95
1081.5 1082.4 0.9 VS074684 0.022 11.75 0.09 2.95
1082.4 1085.1 2.7 VS074685 0.004 10.05 0.02 2.95
1085.1 1087.3 2.2 VS074686 0.001 10.35 0.02 2.95
1087.3 1089.3 2 VS074687 0.001 10.95 0.03 2.94
1089.3 1091.5 2.2 VS074688 0.001 9.68 0.05 2.95
1091.5 1094 2.5 VS074689 0.005 8.88 0.02 2.95
1094 1096.65 2.65 VS074690 0.002 9.05 0.005 2.95
1096.65 1098.15 1.5 VS074691 0.009 10.1 0.03 2.95
1098.15 1099.7 1.55 VS074692 0.004 10.6 0.02 2.95
1099.7 1102.2 2.5 VS074694 0.078 11.65 0.47 2.99
1102.2 1104.7 2.5 VS074695 0.021 11.55 0.06 2.95
1104.7 1107.65 2.95 VS074696 0.026 12.05 0.07 2.95
1107.65 1109.5 1.85 VS074697 0.022 11.2 0.08 2.95
1109.5 1111.2 1.7 VS074698 0.015 11.7 0.06 2.95
1111.2 1112 0.8 VS074699 0.04 12.1 0.14 2.95
1112 1113 1 VS074700 0.06 12 0.36 2.98
1113 1114.1 1.1 VS074701 0.031 11.55 0.66 2.99
1114.1 1115.05 0.95 VS074702 0.025 12.25 0.12 2.99
1115.05 1116 0.95 VS074703 0.037 12.6 0.28 3.03
1116 1117 1 VS074705 0.028 13.55 0.12 3.07
1117 1118.3 1.3 VS074706 0.054 15.1 0.28 3.15
1118.3 1119.05 0.75 VS074707 0.097 18.15 0.43 3.06
1119.05 1120 0.95 VS074708 0.034 11.95 0.2 2.99
1120 1121.1 1.1 VS074709 0.034 13.25 0.23 3.03
1121.1 1122.2 1.1 VS074711 0.106 13 0.46 3.02
1122.2 1123 0.8 VS074712 0.095 15.15 0.8 3.09
1123 1123.9 0.9 VS074713 0.329 30.9 2.06 3.52
1123.9 1125 1.1 VS074714 0.19 16.75 0.94 3.13
1125 1125.7 0.7 VS074715 0.4 18.85 2.27 3.20
1125.7 1126.7 1 VS074716 0.374 20.5 1.73 3.27
1126.7 1127.9 1.2 VS074717 0.594 21.3 3.09 3.31
1127.9 1128.35 0.45 VS074719 0.457 25.7 2.37 3.80
1128.35 1129.05 0.7 VS074720 0.362 18.45 1.91 3.29
1129.05 1129.7 0.65 VS074721 0.215 11.65 0.98 3.20
1129.7 1130.9 1.2 VS074722 0.073 15.8 0.42 3.17
1130.9 1132 1.1 VS074723 0.068 16.25 0.43 3.06
1132 1132.85 0.85 VS074724 0.1 15.35 0.47 3.26
1132.85 1133.5 0.65 VS074725 0.11 20.8 0.49 3.35
1133.5 1134.3 0.8 VS074726 0.229 19.65 1.04 3.34
1134.3 1135.45 1.15 VS074727 0.085 16 0.82 3.09
1135.45 1135.9 0.45 VS074728 0.114 30.4 2.51 3.80
1135.9 1136.9 1 VS074730 0.095 13.1 0.66 3.00
===== SIDA 65 =====
62
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1136.9 1138.15 1.25 VS074731 0.054 10.5 0.41 2.92
1138.15 1139.2 1.05 VS074732 0.005 10.95 0.03 2.98
1139.2 1140.3 1.1 VS074733 0.014 9.58 0.06 2.96
1140.3 1141.2 0.9 VS074734 0.004 10.65 0.04 2.97
1141.2 1142.3 1.1 VS074735 0.029 9.6 0.07 2.98
1142.3 1143.2 0.9 VS074736 0.132 12.55 0.35 3.09
1143.2 1144 0.8 VS074737 0.02 10.65 0.07 2.95
1144 1145 1 VS074738 0.015 10.3 0.05 2.95
1145 1146 1 VS074739 0.009 8.84 0.04 2.95
1146 1148 2 VS074741 0.002 10.15 0.02 2.95
1148 1149.8 1.8 VS074742 0.002 10.05 0.005 2.96
1149.8 1152 2.2 VS074743 0.003 9.81 0.005 2.95
1152 1155 3 VS074744 0.018 10.2 0.05 2.95
1155 1157.1 2.1 VS074745 0.049 10 0.17 2.95
1157.1 1160 2.9 VS074746 0.016 9.42 0.06 2.95
1160 1162 2 VS074747 0.004 9.94 0.02 2.95
1162 1164 2 VS074748 0.016 10.15 0.06 2.95
1164 1166 2 VS074749 0.066 10.9 0.17 2.95
1166 1167.95 1.95 VS074750 0.038 11.35 0.1 2.95
1167.95 1170.4 2.45 VS074752 0.014 8.89 0.03 2.95
1170.4 1173.3 2.9 VS074753 0.006 8.64 0.02 2.95
1173.3 1176 2.7 VS074754 0.007 9.17 0.02 2.90
1176 1177.8 1.8 VS074755 0.007 9.77 0.02 2.95
1177.8 1180.1 2.3 VS074756 0.022 8.29 0.03 2.95
1180.1 1182 1.9 VS074757 0.029 9.32 0.07 2.95
1182 1183.3 1.3 VS074758 0 11.2 0.005 2.95
1183.3 1184.9 1.6 VS074759 0.002 10.15 0.005 2.93
1184.9 1186.85 1.95 VS074760 0.002 6.4 0.02 2.82
1186.85 1188 1.15 VS074761 0.016 7.44 0.06 2.92
1188 1190.8 2.8 VS074763 0.007 12.15 0.005 3.01
1190.8 1192.55 1.75 VS074764 0.024 7.29 0.03 2.93
1192.55 1193.8 1.25 VS074765 0.074 10.2 0.17 2.84
1193.8 1194.5 0.7 VS074766 0.001 7.32 0.005 2.94
1194.5 1195.5 1 VS074767 0.019 13.65 0.03 2.94
1195.5 1195.8 0.3 VS074768 0.089 16.65 0.08 3.03
1195.8 1196.7 0.9 VS074769 0.048 15.65 0.05 2.95
1196.7 1197.9 1.2 VS074770 0.079 16.65 0.12 2.95
1197.9 1198.2 0.3 VS074771 0.044 5.16 0.05 2.95
1198.2 1200 1.8 VS074974 0.03 4.33 0.09 2.74
1200 1202.7 2.7 VS074975 0.022 6.53 0.11 2.87
1202.7 1205.35 2.65 VS074976 0.03 4.62 0.13 2.96
1205.35 1208.05 2.7 VS074977 0.046 5.57 0.26 2.75
1208.05 1210.8 2.75 VS074978 0.059 5.29 0.24 2.82
1210.8 1213.3 2.5 VS074979 0.047 5 0.19 2.73
1213.3 1214.97 1.67 VS074980 0.025 5.12 0.3 2.81
1214.97 1216.65 1.68 VS074981 0.043 7.08 0.17 2.67
1216.65 1219.65 3 VS074982 0.29 7.72 0.84 2.83
===== SIDA 66 =====
63
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1219.65 1221.8 2.15 VS074983 0.631 17.3 2.5 3.13
1221.8 1224.4 2.6 VS074985 0.374 9.29 1.06 2.94
1224.4 1227.05 2.65 VS074986 0.313 5.16 1 2.71
1227.05 1227.7 0.65 VS074987 0.052 10.1 0.19 2.78
1227.7 1229.5 1.8 VS074988 0.362 5.55 1.14 2.84
1229.5 1232.04 2.54 VS074989 0.174 5.79 0.52 2.78
1232.04 1234.5 2.46 VS074990 0.132 7.65 0.36 2.73
1234.5 1237 2.5 VS074991 0.65 7.38 1.6 2.76
1237 1239.2 2.2 VS074992 0.066 5.46 0.19 2.66
1239.2 1241.15 1.95 VS074993 0.295 5.91 0.62 2.70
1241.15 1243.35 2.2 VS074994 0.138 6.84 0.37 2.70
1243.35 1245.45 2.1 VS074995 0.293 4.91 0.67 2.72
1245.45 1247.7 2.25 VS074996 0.069 9.02 0.17 2.93
1247.7 1250.54 2.84 VS074997 0.01 9.23 0.03 3.12
1250.54 1253.3 2.76 VS074998 0.035 10.05 0.07 2.97
1253.3 1256 2.7 VS074999 0.035 10.5 0.06 3.09
1256 1258.3 2.3 VS075001 0.11 10.85 0.18 2.90
1258.3 1260.82 2.52 VS075002 0.182 11.25 0.39 3.02
1260.82 1263 2.18 VS075003 0.158 10.7 0.23 2.90
1263 1265.75 2.75 VS075004 0.03 10.2 0.03 3.05
1265.75 1268.6 2.85 VS075005 0.017 10.5 0.03 3.10
1268.6 1271.36 2.76 VS075006 0.047 10.6 0.05 2.99
1271.36 1274.22 2.86 VS075007 0.102 11.25 0.12 3.10
1274.22 1277 2.78 VS075008 0.102 10.45 0.09 3.02
1277 1279.7 2.7 VS075009 0.026 10.6 0.09 2.94
1279.7 1282.4 2.7 VS075010 0.022 10.6 0.03 2.99
1282.4 1285 2.6 VS075011 0.006 9.29 0.04 3.12
1285 1287.3 2.3 VS075012 0.017 9.61 0.005 2.93
1287.3 1290 2.7 VS075013 0.007 10.45 0.005 3.01
1290 1293 3 VS075014 0.01 9.53 0.02 2.92
1293 1296 3 VS075015 0.007 9.28 0.02 3.08
1296 1299 3 VS075016 0.01 8.9 0.02 2.94
1299 1302 3 VS075018 0.009 9.63 0.02 2.92
1302 1305 3 VS075019 0.005 9.52 0.02 3.04
1305 1308 3 VS075020 0.008 9.85 0.03 3.10
1308 1310.8 2.8 VS075021 0.01 9.8 0.04 2.96
1310.8 1313.56 2.76 VS075022 0.034 10.1 0.07 3.02
1313.56 1316.38 2.82 VS075023 0.037 10.8 0.03 3.09
1316.38 1319.2 2.82 VS075024 0.022 10.15 0.02 3.08
1319.2 1322 2.8 VS075025 0.011 9.52 0.02 3.08
1322 1324.74 2.74 VS075026 0.011 9.44 0.02 3.04
1324.74 1327.5 2.76 VS075027 0.013 8.85 0.02 3.11
1327.5 1330.25 2.75 VS075028 0.004 9.1 0.005 2.89
1330.25 1332.98 2.73 VS075029 0.003 8.81 0.005 3.03
1332.98 1335.73 2.75 VS075030 0.009 8.31 0.02 2.88
1335.73 1338.44 2.71 VS075031 0.003 8.93 0.005 3.04
1338.44 1341 2.56 VS075032 0.002 9.04 0.005 2.99
===== SIDA 67 =====
64
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1341 1343.1 2.1 VS075548 0.009 8.27 0.03 3.00
1343.1 1345 1.9 VS075549 0.013 8.34 0.02 3.01
1345 1348 3 VS075550 0.008 8.65 0.02 3.01
1348 1351 3 VS075551 0.011 8.72 0.03 3.02
1351 1353 2 VS075552 0.013 8.65 0.03 3.02
1353 1355.05 2.05 VS075553 0.013 8.72 0.03 2.95
1355.05 1356.05 1 VS075554 0.002 9.77 0.005 2.95
1356.05 1359 2.95 VS075555 0.012 9.01 0.02 2.95
1359 1362 3 VS075556 0.009 8.94 0.02 3.03
1362 1365 3 VS075557 0.015 9.01 0.03 3.04
1365 1368 3 VS075559 0.056 9.97 0.05 3.04
1368 1371 3 VS075560 0.028 9.2 0.04 3.04
1371 1374 3 VS075561 0.025 9.8 0.03 2.92
1374 1375.25 1.25 VS075562 0.119 6.78 0.05 2.92
1375.25 1376.5 1.25 VS075563 0.075 4.24 0.08 2.92
1376.5 1377.5 1 VS075564 0.412 3.78 0.41 2.80
1377.5 1378.7 1.2 VS075565 1.185 5 1.92 2.80
1378.7 1380 1.3 VS075566 0.652 3.93 0.44 2.74
1380 1381 1 VS075567 0.226 4.03 0.13 2.80
1381 1382 1 VS075568 0.242 2.92 0.12 2.80
1382 1383.3 1.3 VS075569 0.194 1.78 0.12 2.80
1383.3 1383.8 0.5 VS075571 1.29 3.99 0.7 2.73
1383.8 1384.9 1.1 VS075572 5.42 11.55 2.52 3.17
1384.9 1386 1.1 VS075573 1.335 4.93 0.64 2.75
1386 1386.78 0.78 VS075574 0.801 3.48 0.52 2.71
1386.78 1388 1.22 VS075576 0.289 2.5 0.3 2.80
1388 1389 1 VS075577 0.198 1.76 0.13 2.80
1389 1390.05 1.05 VS075578 0.449 2.24 0.29 2.80
1390.05 1390.4 0.35 VS075579 7.07 11.05 5.78 2.80
1390.4 1391.7 1.3 VS075580 0.49 2.11 0.38 2.80
1391.7 1393 1.3 VS075581 1.075 3.44 0.94 2.80
1393 1393.85 0.85 VS075582 0.216 2.82 0.26 2.80
1393.85 1394.65 0.8 VS075583 0.091 1.92 0.09 2.72
1394.65 1395.9 1.25 VS075584 0.162 2.12 0.08 2.80
1395.9 1397 1.1 VS075585 0.456 2.49 0.45 2.80
1397 1398.25 1.25 VS075587 0.655 3.36 0.6 2.80
1398.25 1399.5 1.25 VS075588 0.024 3.46 0.03 2.78
1399.5 1400.85 1.35 VS075589 0.001 3.23 0.02 2.78
1400.85 1403.1 2.25 VS075590 0 3.26 0.005 2.75
1403.1 1405.5 2.4 VS075591 0.017 3.74 0.03 2.95
1405.5 1407.3 1.8 VS075592 0.015 3.42 0.05 2.95
1407.3 1409.1 1.8 VS075593 0.293 4.6 0.07 2.95
1409.1 1410 0.9 VS075594 0.937 8.57 0.82 3.02
1410 1411.2 1.2 VS075595 1.21 8.86 0.26 2.86
1411.2 1412.9 1.7 VS075596 0.299 3.05 0.06 2.70
1412.9 1415 2.1 VS075598 0.004 2.38 0.04 2.76
1415 1417 2 VS075599 0.051 2.8 0.04 2.76
===== SIDA 68 =====
65
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1417 1419 2 VS075600 0.187 3.96 0.04 2.82
1419 1420.3 1.3 VS075601 0.148 7.4 0.02 2.90
1420.3 1423.3 3 VS075602 0.118 11.55 0.09 2.90
1423.3 1426 2.7 VS075603 0.142 8.99 0.27 2.97
1426 1428.5 2.5 VS075604 0.128 10.9 0.14 2.95
1428.5 1429.8 1.3 VS075605 0.122 10.25 0.37 2.95
1429.8 1431.1 1.3 VS075606 0.098 10.55 0.13 2.95
1431.1 1432.4 1.3 VS075607 0.069 10.8 0.06 2.95
1432.4 1433.7 1.3 VS075609 0.037 12.15 0.09 2.96
1433.7 1435 1.3 VS075610 0.251 11.2 0.24 2.95
1435 1436.3 1.3 VS075611 0.09 10.9 0.08 2.95
1436.3 1437.6 1.3 VS075612 0.134 10.45 0.3 2.95
1437.6 1438.9 1.3 VS075613 0.084 9.7 0.05 2.95
1438.9 1439.8 0.9 VS075614 0.011 9.88 0.03 2.95
1439.8 1440.6 0.8 VS075615 0.015 10 0.03 2.95
1440.6 1441.8 1.2 VS075617 0.212 13.05 0.08 2.96
1441.8 1443.1 1.3 VS075618 0.125 13.45 0.11 2.95
1443.1 1444.3 1.2 VS075619 0.211 13.8 0.08 2.95
1444.3 1445.6 1.3 VS075620 0.19 15.85 0.09 2.95
1445.6 1446.9 1.3 VS075621 0.138 16.35 0.08 2.95
1446.9 1448.2 1.3 VS075622 0.118 17.5 0.05 3.06
1448.2 1449.5 1.3 VS075623 0.066 17.25 0.05 3.07
1449.5 1450.7 1.2 VS075624 0.07 17 0.05 3.07
1450.7 1452 1.3 VS075625 0.156 16.5 0.07 3.08
1452 1453.15 1.15 VS075626 0.103 16.25 0.07 3.08
1453.15 1454.4 1.25 VS075627 0.183 16.05 0.09 3.08
1454.4 1455.6 1.2 VS075629 0.198 15 0.11 3.08
1455.6 1456.9 1.3 VS075630 0.369 15.75 0.67 2.95
1456.9 1458.2 1.3 VS075631 0.615 14.8 0.91 2.95
1458.2 1459.5 1.3 VS075632 0.466 9.68 0.78 2.76
1459.5 1460.5 1 VS075633 0.625 14.85 1.04 2.95
1460.5 1461.2 0.7 VS075634 1.12 13.9 0.45 2.99
1461.2 1462.2 1 VS075635 1.585 14.2 0.67 2.95
1462.2 1463.2 1 VS075636 0.45 11.8 0.29 2.95
1463.2 1464.2 1 VS075637 0.545 18.85 0.26 2.95
1464.2 1465.2 1 VS075638 0.496 16.4 0.25 3.04
1465.2 1466.2 1 VS075640 1.06 18 0.29 2.95
1466.2 1467.45 1.25 VS075641 0.64 17 0.21 2.95
1467.45 1468.6 1.15 VS075642 0.885 11.9 0.3 2.95
1468.6 1469.8 1.2 VS075643 0.892 12 0.3 2.95
1469.8 1471.1 1.3 VS075644 0.589 15.8 0.24 3.02
1471.1 1472.2 1.1 VS075645 0.174 17.7 0.13 3.11
1472.2 1473.3 1.1 VS075646 0.04 18.6 0.07 3.11
1473.3 1474.6 1.3 VS075647 0.061 19.6 0.08 3.11
1474.6 1475.9 1.3 VS075648 0.355 18.2 0.14 3.20
1475.9 1477.2 1.3 VS075649 0.305 18 0.13 3.12
1477.2 1478.5 1.3 VS075651 0.032 17 0.05 3.12
===== SIDA 69 =====
66
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1478.5 1479.8 1.3 VS075652 0.054 16.55 0.06 3.03
1479.8 1481.1 1.3 VS075653 0.064 17.05 0.08 3.04
1481.1 1482.3 1.2 VS075654 0.405 16.25 0.2 3.04
1482.3 1483.6 1.3 VS075655 0.065 16.7 0.07 3.04
1483.6 1484.9 1.3 VS075656 0.071 13.85 0.1 3.04
1484.9 1485.9 1 VS075657 0.066 16.2 0.08 3.08
1485.9 1487.2 1.3 VS075659 0.05 15.55 0.06 3.08
1487.2 1488.5 1.3 VS075660 0.03 14.9 0.1 3.07
1488.5 1489.8 1.3 VS075661 0.041 15.5 0.09 3.01
1489.8 1490.8 1 VS075662 0.04 14.75 0.09 3.01
1490.8 1492.1 1.3 VS075663 0.264 12.75 0.42 3.01
1492.1 1493.4 1.3 VS075664 0.067 13.1 0.09 2.95
1493.4 1494.65 1.25 VS075665 0.007 14.35 0.02 3.04
1494.65 1495.9 1.25 VS075666 0.012 14.45 0.03 3.04
1495.9 1497.2 1.3 VS075667 0.071 13.15 0.09 3.04
1497.2 1498.4 1.2 VS075668 0.012 14.55 0.03 3.13
1498.4 1499.5 1.1 VS075670 0.026 14.6 0.05 3.12
1499.5 1502.5 3 VS075671 0.086 15.6 0.16 3.10
1502.5 1505.5 3 VS075672 0.03 14.15 0.04 3.12
1505.5 1508 2.5 VS075673 0.062 14.55 0.07 3.14
1508 1510 2 VS075675 0.049 15.35 0.08 3.14
1510 1512.55 2.55 VS075676 0.047 15.35 0.07 3.16
1512.55 1515 2.45 VS075855 0.052 15.9 0.04 3.11
1515 1516.9 1.9 VS075856 0.051 14.5 0.06 3.13
1516.9 1519.3 2.4 VS075857 0.082 11.2 0.08 3.13
1519.3 1520.8 1.5 VS075858 0.024 10.1 0.04 3.13
1520.8 1523 2.2 VS075859 0.023 10.2 0.06 3.13
1523 1526 3 VS075860 0.025 10.1 0.03 3.13
1526 1529 3 VS075861 0.116 9.75 0.06 3.14
1529 1532 3 VS075862 0.05 10.1 0.03 3.02
1532 1535 3 VS075863 0.015 9.79 0.02 2.89
1535 1538 3 VS075864 0.03 9.98 0.02 3.04
1538 1541 3 VS075865 0.106 10.5 0.1 3.04
1541 1544 3 VS075867 0.026 10.1 0.05 3.04
1544 1547 3 VS075868 0.02 10.2 0.02 3.04
1547 1550 3 VS075869 0.018 9.86 0.03 3.04
1550 1553 3 VS075870 0.008 9.96 0.005 3.04
1553 1556 3 VS075871 0.019 10.05 0.03 3.04
1556 1559 3 VS075872 0.08 9.9 0.04 3.04
1559 1562 3 VS075873 0.018 9.8 0.02 3.04
1562 1565 3 VS075874 0.016 10.55 0.03 3.04
1565 1568 3 VS075875 0.02 9.57 0.02 3.04
1568 1571 3 VS075876 0.014 10 0.005 3.18
1571 1574 3 VS075878 0.017 10.25 0.005 3.01
1574 1577 3 VS075879 0.02 9.99 0.03 3.01
1577 1580 3 VS075880 0.009 9.99 0.02 3.01
1580 1583 3 VS075881 0.012 9.94 0.02 3.01
===== SIDA 70 =====
67
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1583 1586 3 VS075882 0.011 10.35 0.005 3.01
1586 1589 3 VS075883 0.021 10 0.02 3.01
1589 1592 3 VS075884 0.027 10.65 0.005 3.01
1592 1594.9 2.9 VS075885 0.019 10.45 0.03 3.01
1594.9 1597.5 2.6 VS075886 0.016 10.95 0.02 3.01
1597.5 1600 2.5 VS075887 0.011 10.95 0.02 3.01
1600 1603 3 VS075889 0.002 10.75 0.005 3.01
1603 1605.8 2.8 VS075890 0.005 11.05 0.02 2.84
1605.8 1608.8 3 VS075891 0.011 9.77 0.02 2.84
1608.8 1611.8 3 VS075892 0.004 8.96 0.005 2.83
1611.8 1614 2.2 VS075893 0.03 10.05 0.02 2.74
1614 1617 3 VS075894 0.034 4.64 0.005 2.65
1617 1620 3 VS075895 0.004 6.35 0.03 3.00
1620 1621.85 1.85 VS075896 0.013 4.54 0.03 3.00
1621.85 1623.7 1.85 VS075897 0.172 9.46 0.11 3.35
1623.7 1625.7 2 VS075898 0.008 2.25 0.03 3.63
1625.7 1628 2.3 VS075900 0.244 13.25 0.15 3.91
1628 1631 3 VS075901 0.035 7.64 0.04 3.31
1631 1633 2 VS075902 0.004 5.12 0.02 2.71
1633 1635 2 VS075903 0 5.1 0.005 2.83
1635 1638 3 VS075904 0.002 5.91 0.02 2.83
1638 1641 3 VS075905 0 5.24 0.005 2.83
1641 1644 3 VS075906 0 4.99 0.005 2.83
1644 1644.6 0.6 VS075907 0.001 5.02 0.005 2.83
1644.6 1647 2.4 VS075908 0.001 9.21 0.005 2.83
1647 1650 3 VS075909 0.015 12.5 0.02 2.94
1650 1652 2 VS075911 0.01 9.96 0.03 2.95
1652 1655 3 VS075912 0.04 9.63 0.06 2.95
1655 1657.05 2.05 VS075913 0.01 6.92 0.005 2.95
1657.05 1659.9 2.85 VS075914 0.009 3.09 0.005 2.71
1659.9 1661.5 1.6 VS075915 0.001 4.18 0.02 2.68
1661.5 1664.45 2.95 VS075916 0.003 3.34 0.005 2.64
1664.45 1667 2.55 VS075917 0.047 6.37 0.04 2.85
1667 1670 3 VS075918 0.014 7.64 0.02 2.85
1670 1673 3 VS075919 0.057 7.55 0.03 2.85
1673 1676 3 VS075920 0.037 5.9 0.005 3.05
1676 1677 1 VS075922 0.085 5.4 0.03 2.95
1677 1679.1 2.1 VS075923 0.11 4.32 0.04 2.95
1679.1 1681 1.9 VS075924 0.295 7.43 0.06 2.95
1681 1682.5 1.5 VS075925 0.295 5.61 0.06 2.84
1682.5 1682.8 0.3 VS075926 0.01 36.8 0.005 3.87
1682.8 1685 2.2 VS075927 0.002 8.93 0.06 3.26
1685 1687.8 2.8 VS075928 0.072 7.85 0.04 3.26
1687.8 1690.8 3 VS075929 0.013 3.52 0.005 3.26
1690.8 1693.7 2.9 VS075930 0.004 2.9 0.005 2.65
1693.7 1696.4 2.7 VS075931 0.013 6.52 0.02 2.70
1696.4 1698.5 2.1 VS075933 0.014 8.09 0.02 2.70
===== SIDA 71 =====
68
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1698.5 1701.1 2.6 VS075934 0.192 4.19 0.09 2.75
1701.1 1704 2.9 VS075935 0.04 4.61 0.02 2.74
1704 1707 3 VS075936 0.001 3.55 0.005 2.73
1707 1708.95 1.95 VS075937 0 3.45 0.005 2.76
1708.95 1710.25 1.3 VS075938 0 6.29 0.005 2.78
1710.25 1711.3 1.05 VS075939 0 2.78 0.005 2.72
1711.3 1712.6 1.3 VS075940 0 4.46 0.005 2.72
1712.6 1713.9 1.3 VS075942 0.001 3.13 0.005 2.66
1713.9 1715.2 1.3 VS075943 0.004 3.59 0.02 2.70
1715.2 1716.3 1.1 VS075944 0.009 4.21 0.005 2.70
1716.3 1717.3 1 VS075945 0.176 4.5 0.03 2.73
1717.3 1718.15 0.85 VS075946 0.024 6.57 0.03 3.01
1718.15 1718.9 0.75 VS075947 0.044 9.39 0.04 3.22
1718.9 1719.4 0.5 VS075949 2.09 41.7 0.87 3.58
1719.4 1719.8 0.4 VS075950 0.776 50.6 0.3 4.05
1719.8 1720.12 0.32 VS075951 0.435 40.7 0.16 3.58
1720.12 1721.3 1.18 VS076191 1.435 38.7 0.55 4.25
1721.3 1721.6 0.3 VS076192 0.046 6.41 0.03 3.05
1721.6 1722.42 0.82 VS076193 0.898 24.7 0.46 3.33
1722.42 1722.96 0.54 VS076194 1.155 25.9 0.59 3.26
1722.96 1723.65 0.69 VS076195 0.019 11 0.09 2.92
1723.65 1724.54 0.89 VS076197 0.032 4.68 0.12 2.84
1724.54 1725.14 0.6 VS076199 0.474 13.35 0.33 3.10
1725.14 1725.88 0.74 VS076200 1.11 16.35 0.81 3.07
1725.88 1726.6 0.72 VS076202 0.146 2.67 0.09 3.03
1726.6 1727.7 1.1 VS076204 1.17 27.4 0.49 2.84
1727.7 1728.65 0.95 VS076205 1.505 29.3 0.76 3.49
1728.65 1728.96 0.31 VS076206 0.043 0.91 0.03 3.30
1728.96 1730.2 1.24 VS076207 1.43 32.8 0.53 3.54
1730.2 1731.4 1.2 VS076208 0.966 18.45 0.74 3.26
1731.4 1732.6 1.2 VS076209 1.31 28 0.56 3.69
1732.6 1733.16 0.56 VS076210 1.135 26 0.62 3.49
1733.16 1734.2 1.04 VS076211 0.152 38.6 0.28 3.62
1734.2 1734.8 0.6 VS076213 0.003 19.4 0.005 3.16
1734.8 1735.55 0.75 VS076214 0.064 44.2 0.07 3.69
1735.55 1736.8 1.25 VS076215 0.148 12.8 0.13 2.94
1736.8 1738 1.2 VS076216 0.09 20.6 0.08 3.21
1738 1738.9 0.9 VS076217 0.054 14.25 0.09 3.21
1738.9 1739.6 0.7 VS076218 0.002 10.5 0.005 2.91
1739.6 1740.85 1.25 VS076219 1.505 8.14 0.44 2.90
1740.85 1741.8 0.95 VS076221 0.152 10.7 0.09 2.97
1741.8 1742.45 0.65 VS076222 0.136 17.15 0.09 3.11
1742.45 1743.5 1.05 VS076223 0.362 12.35 0.18 2.99
1743.5 1744.6 1.1 VS076224 0.064 35.3 0.04 4.09
1744.6 1745.2 0.6 VS076225 0.009 11.15 0.02 2.83
1745.2 1746.04 0.84 VS076227 0.437 54.5 0.08 4.56
1746.04 1746.65 0.61 VS076228 0.341 17.9 0.02 2.86
===== SIDA 72 =====
69
HOLE ID: VDD24036
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1746.65 1747.9 1.25 VS076230 0.075 7.92 0.02 2.90
1747.9 1748.3 0.4 VS076231 0.333 39.8 0.87 3.80
1748.3 1749.25 0.95 VS076232 0.296 11 0.18 2.94
1749.25 1750.3 1.05 VS076233 0.704 33.7 0.49 3.41
1750.3 1751.45 1.15 VS076234 0.545 13.05 0.3 3.00
1751.45 1752.55 1.1 VS076235 0.42 15.1 0.29 2.99
1752.55 1753.5 0.95 VS076237 0.639 45.4 0.52 3.96
1753.5 1754.3 0.8 VS076238 0.323 44.8 0.32 4.03
1754.3 1755.24 0.94 VS076239 0.253 39.2 0.25 3.95
1755.24 1756 0.76 VS076240 0.605 10.85 0.59 2.96
1756 1756.6 0.6 VS076241 0.379 9.75 0.32 4.47
1756.6 1757.08 0.48 VS076242 0.217 40.4 0.25 3.90
1757.08 1758.25 1.17 VS076243 0.032 5.45 0.06 2.86
1758.25 1759.4 1.15 VS076244 0.204 7.54 0.44 3.07
1759.4 1760.08 0.68 VS076245 0.015 8.13 0.02 2.93
1760.08 1760.8 0.72 VS076246 0.004 5.17 0.005 3.07
1760.8 1762.1 1.3 VS076248 0.256 7.54 0.31 2.93
1762.1 1763.25 1.15 VS076249 0.235 8.57 0.31 2.99
1763.25 1764 0.75 VS076250 0.058 27 0.08 3.50
1764 1764.4 0.4 VS076251 0.623 26.6 0.18 3.68
1764.4 1765.7 1.3 VS076252 0.152 7.9 0.04 2.99
1765.7 1766.7 1 VS076253 0.003 7.01 0.005 2.94
1766.7 1767.7 1 VS076254 0.067 18.6 0.04 3.19
1767.7 1768.4 0.7 VS076255 0.096 8.25 0.04 3.13
1768.4 1769.25 0.85 VS076256 0.131 7.76 0.05 2.88
1769.25 1770.3 1.05 VS076258 0.23 11.35 0.11 2.91
1770.3 1771.42 1.12 VS076259 0.533 4.76 0.2 2.95
1771.42 1772.45 1.03 VS076260 0.039 6.39 0.005 2.96
1772.45 1773.1 0.65 VS076261 0.152 5.21 0.04 2.96
1773.1 1774.3 1.2 VS076262 0.033 5.61 0.005 2.85
1774.3 1775.5 1.2 VS076263 0 4.02 0.005 2.97
===== SIDA 73 =====
70
HOLE ID: VDD25013D
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
672.5 674.8 2.30 VS077467 0.005 13.6 0.05 3.10
674.8 676.8 2.00 VS077468 0.01 13.7 0.04 3.18
676.8 679 2.20 VS077469 0.014 14.8 0.05 3.08
679 680.3 1.30 VS077470 0.015 12.1 0.05 3.08
680.3 683.1 2.80 VS077471 0.044 14.4 0.09 2.98
683.1 683.5 0.40 VS077472 0.006 12.5 0.03 2.95
683.5 686 2.50 VS077473 0.06 14.05 0.12 2.95
686 688 2.00 VS077474 0.025 14.2 0.04 2.91
688 690.7 2.70 VS077475 0.039 13.7 0.04 2.93
690.7 692 1.30 VS077476 0.008 14.7 0.02 2.93
692 694.05 2.05 VS077478 0.011 13.5 0.03 2.94
694.05 695.55 1.50 VS077479 0.034 15.9 0.06 2.89
695.55 697.5 1.95 VS077480 0.069 14.55 0.1 2.89
697.5 700 2.50 VS077481 0.016 14.2 0.03 2.83
700 703 3.00 VS077482 0.02 13.8 0.03 2.83
703 706 3.00 VS077483 0.019 14 0.03 2.83
706 708 2.00 VS077484 0.01 12.05 0.005 2.82
708 709.8 1.80 VS077485 0.045 13.35 0.06 2.97
709.8 711.7 1.90 VS077487 0.048 12.1 0.07 2.97
711.7 714 2.30 VS077488 0.068 15.8 0.09 3.11
714 716.8 2.80 VS077489 0.054 13.8 0.06 3.06
716.8 718.8 2.00 VS077490 0.011 11.95 0.02 3.06
718.8 719.95 1.15 VS077491 0.003 12 0.005 3.01
719.95 720.35 0.40 VS077492 0.01 10.65 0.03 3.02
720.35 721.75 1.40 VS077493 0.01 9.78 0.02 3.02
722.1 723.7 1.60 VS077494 0.041 11.7 0.04 3.03
723.7 725 1.30 VS077495 0.048 13.45 0.05 3.08
725 727.8 2.80 VS077497 0.039 8.32 0.04 3.08
727.8 730.25 2.45 VS077498 0.047 11.15 0.04 3.12
730.25 732.8 2.55 VS077499 0.021 7.45 0.03 3.01
732.8 734.5 1.70 VS077500 0.013 7.99 0.02 3.01
734.5 736.25 1.75 VS077501 0.02 9.53 0.03 2.9
736.25 738 1.75 VS077502 0.066 9.03 0.06 2.94
738 740.4 2.40 VS077503 0.051 9.35 0.06 2.94
740.4 742 1.60 VS077504 0.012 10.3 0.03 2.97
742 744.3 2.30 VS077506 0.036 11.45 0.06 3.26
744.3 745.8 1.50 VS077507 0.146 17.05 0.15 3.26
745.8 746.5 0.70 VS077508 0.45 27.9 0.35 3.54
746.5 747.05 0.55 VS077509 0.306 16.65 0.26 3.26
747.05 749.45 2.40 VS077510 0.193 13.4 0.16 3.26
749.45 751 1.55 VS077511 0.203 15.75 0.26 2.98
751 753.45 2.45 VS077512 0.136 17.3 0.19 2.98
753.45 754 0.55 VS077513 0.266 9.58 0.58 2.98
754 755 1.00 VS077514 0.292 10.35 0.78 2.97
755 756.1 1.10 VS077516 0.257 11.6 0.69 2.99
756.1 757 0.90 VS077517 0.065 13.8 0.27 2.99
757 758 1.00 VS077518 0.141 13 0.43 3
===== SIDA 74 =====
71
HOLE ID: VDD25013D
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
758 759 1.00 VS077519 0.176 13.3 0.58 3.00
759 760 1.00 VS077520 0.064 13.5 0.25 3.00
760 760.8 0.80 VS077521 0.087 13.95 0.33 3
760.8 761.85 1.05 VS077522 0.761 20.5 2.67 3.81
761.85 762.75 0.90 VS077523 1.93 38 6.13 4.62
762.75 764 1.25 VS077524 0.258 14.05 0.85 3.77
764 765 1.00 VS077526 0.053 11.45 0.21 3.77
765 766.3 1.30 VS077527 0.171 13.65 0.62 3.77
766.3 767.4 1.10 VS077528 0.032 12.6 0.13 2.91
767.4 768 0.60 VS077529 0.02 12.7 0.08 3.32
768 769.1 1.10 VS077530 0.08 16.15 0.28 3.32
769.1 769.65 0.55 VS077531 0.45 28.7 1.36 3.72
769.65 770 0.35 VS077532 0.862 28.9 1.96 3.8
770 771 1.00 VS077533 0.12 11.75 0.29 2.91
771 772 1.00 VS077534 0.192 10.15 0.47 3.06
772 773 1.00 VS077536 0.177 10.3 0.46 2.92
773 774 1.00 VS077537 0.166 11.9 0.36 3.02
774 775 1.00 VS077538 0.556 12.6 1.4 3.08
775 776.2 1.20 VS077539 0.682 12.95 1.61 3.37
776.2 777 0.80 VS077541 0.036 11.7 0.11 2.99
777 778 1.00 VS077542 0.114 10.3 0.24 3.03
778 779 1.00 VS077543 0.154 11.65 0.35 3.00
779 780 1.00 VS077544 0.26 10.65 0.68 2.96
780 781 1.00 VS077545 0.148 10.8 0.39 3.03
781 781.6 0.60 VS077547 0.111 11.3 0.27 3
781.6 782.8 1.20 VS077548 0.132 10.5 0.38 3.03
782.8 783.65 0.85 VS077549 0.693 10.55 1.62 3.12
783.65 784.5 0.85 VS077550 1.535 9.77 3.4 3.08
784.5 785 0.50 VS077551 1.695 11.05 3.83 3.1
785 786.3 1.30 VS077552 0.924 9.05 2.07 3.18
786.3 787 0.70 VS077553 2.92 10.65 6.32 3.07
787 788.1 1.10 VS077554 1.885 13.55 3.97 3.11
788.1 789 0.90 VS077555 0.322 12.6 0.66 3.11
789 789.65 0.65 VS077557 0.71 12.1 1.46 3.04
789.65 790 0.35 VS077558 0.671 12.25 1.42 3.08
790 791 1.00 VS077559 1.16 13.85 2.27 3.07
791 792 1.00 VS077560 0.981 13.65 1.8 3.11
792 793 1.00 VS077561 0.833 12.85 1.54 2.99
793 794 1.00 VS077562 1.325 10.25 2.24 3.02
794 795 1.00 VS077563 1.015 11.4 1.6 3.11
795 796 1.00 VS077564 0.89 15.45 1.48 3.17
796 796.55 0.55 VS077565 0.614 17.05 1.28 3.24
796.55 797 0.45 VS077567 0.18 13.95 0.35 2.99
797 798 1.00 VS077568 0.351 13.25 0.58 2.99
798 799 1.00 VS077569 0.024 10.7 0.07 3.13
799 800 1.00 VS077570 0.028 11.1 0.07 3.01
800 801 1.00 VS077571 0.161 11.85 0.36 2.95
===== SIDA 75 =====
72
HOLE ID: VDD25013D
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
801 802 1.00 VS077572 0.247 11.65 1.02 2.94
802 803 1.00 VS077573 0.312 11.9 0.59 3.06
803 804 1.00 VS077574 0.118 12 0.26 3.04
804 805 1.00 VS077575 0.173 12.3 0.33 3.06
805 805.85 0.85 VS077577 0.43 13.2 0.73 3.08
805.85 807 1.15 VS077578 0.881 11.65 1.46 3.11
807 807.85 0.85 VS077579 0.665 10.6 1.08 3.1
807.85 809 1.15 VS077580 0.12 11.45 0.22 3.05
809 809.6 0.60 VS077581 0.213 9.93 0.38 3.06
809.6 810 0.40 VS077582 0.648 11.75 1.04 3.02
810 811 1.00 VS077583 0.592 9.61 1.01 3.02
811 812 1.00 VS077584 0.574 12.95 0.97 2.97
812 813.3 1.30 VS077585 0.122 10.5 0.25 3.29
813.3 814 0.70 VS077587 0.06 10.4 0.11 3.01
814 814.8 0.80 VS077588 0.098 9.79 0.14 3.03
814.8 816 1.20 VS077589 0.034 8.64 0.07 3.07
816 817 1.00 VS077590 0.192 11.7 0.42 3.07
817 817.6 0.60 VS077591 0.038 9.79 0.08 3.1
817.6 818 0.40 VS077592 0.04 9.45 0.06 3.05
818 819.05 1.05 VS077636 0.066 10.45 0.09 3.05
819.05 820 0.95 VS077637 0.072 13.6 0.15 3
820 821 1.00 VS077638 0.16 15.45 0.23 3.02
821 822 1.00 VS077639 0.098 14.8 0.4 3.02
822 823 1.00 VS077640 0.097 14.65 0.21 3.04
823 823.7 0.70 VS077641 0.098 14.95 0.13 3.07
823.7 825 1.30 VS077642 0.112 15.3 0.19 3.07
825 826 1.00 VS077643 0.206 15.3 0.3 3.09
826 826.65 0.65 VS077644 0.142 12.5 0.21 3.13
826.65 827 0.35 VS077645 0.377 15.1 0.53 3.17
827 828 1.00 VS077647 0.047 15 0.08 3.12
828 829.05 1.05 VS077648 0.269 15.5 0.4 3.06
829.05 829.55 0.50 VS077649 1.645 29 2.78 3.58
829.55 830.8 1.25 VS077650 0.901 15.85 1.31 3.30
830.8 832 1.20 VS077651 0.176 13.3 0.27 3.01
832 833 1.00 VS077652 0.122 13.9 0.21 3.03
833 834 1.00 VS077653 0.221 12.4 0.4 3.01
834 835 1.00 VS077654 0.493 13.65 0.73 3.02
835 836 1.00 VS077655 0.236 12.55 0.36 2.97
836 836.95 0.95 VS077656 0.331 12.5 0.52 2.98
836.95 838 1.05 VS077658 0.322 13.3 0.48 3.01
838 839 1.00 VS077659 0.096 11.85 0.14 2.98
839 840 1.00 VS077660 0.269 12.7 0.42 3
840 840.55 0.55 VS077661 0.297 12.65 0.45 3.01
840.55 841 0.45 VS077662 0.897 11.5 1.26 3.01
841 842 1.00 VS077663 0.704 13.45 0.88 3.16
842 843 1.00 VS077664 0.276 12.5 0.34 3.02
843 844 1.00 VS077665 0.31 13.8 0.47 3.13
===== SIDA 76 =====
73
HOLE ID: VDD25013D
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
844 845 1.00 VS077666 1.125 12.55 1.32 3.08
845 846 1.00 VS077667 1.66 13.6 2.02 3.11
846 847 1.00 VS077669 1.37 10.25 1.62 2.99
847 848 1.00 VS077670 1.135 11.15 1.42 3.01
848 849 1.00 VS077671 0.854 13.35 1.06 3.1
849 850 1.00 VS077672 0.283 10.2 0.35 3.02
850 851 1.00 VS077673 0.589 11.5 0.69 3.05
851 852 1.00 VS077674 0.413 10.5 0.5 2.94
852 853 1.00 VS077675 1.575 12.4 1.84 3.26
853 854 1.00 VS077676 1.025 11.4 1.2 3.03
854 855 1.00 VS077677 1.17 14.9 1.3 3.08
855 856 1.00 VS077678 0.792 12.6 0.97 3.05
856 857 1.00 VS077680 0.633 12 0.77 3.03
857 858 1.00 VS077681 1.355 12.6 1.58 3.29
858 859 1.00 VS077682 0.249 10.75 0.32 3.04
859 860 1.00 VS077683 0.183 11.1 0.22 3.05
860 861 1.00 VS077684 0.274 12.45 0.36 3.05
861 862 1.00 VS077685 0.542 13.2 0.68 3.05
862 863 1.00 VS077686 0.285 11.2 0.41 3.09
863 863.65 0.65 VS077687 0.465 13.25 0.58 3.09
863.65 864 0.35 VS077688 1.745 14.6 2.14 3.13
864 865 1.00 VS077689 0.99 11.45 1.18 3
865 866 1.00 VS077691 0.787 11.4 1.02 3.05
866 867 1.00 VS077692 1.005 11.5 1.23 3.03
867 868 1.00 VS077693 0.183 10.45 0.27 3
868 868.95 0.95 VS077694 0.428 11.85 0.55 2.99
868.95 870 1.05 VS077695 1.26 15.95 1.8 3.16
870 871 1.00 VS077696 0.307 10.85 0.5 2.97
871 871.45 0.45 VS077697 0.841 9.54 1.08 3.01
871.45 872.1 0.65 VS077698 2.02 20.7 2.52 3.75
872.1 873.2 1.10 VS077699 0.481 11.7 0.55 2.98
873.2 874.1 0.90 VS077700 0.901 15.85 1.03 3
874.1 874.75 0.65 VS077702 0.864 13.6 1.07 2.97
874.75 876 1.25 VS077703 0.646 11.3 0.79 3
876 876.4 0.40 VS077704 2.66 12.75 3.14 3.07
876.4 877 0.60 VS077705 1.95 12 2.26 3.03
877 878 1.00 VS077706 1.055 12.1 1.23 2.94
878 879 1.00 VS077707 0.823 12.2 1.04 3.32
879 880 1.00 VS077708 0.759 15.9 0.9 3.05
880 881 1.00 VS077709 0.806 12.9 1.02 2.96
881 881.85 0.85 VS077710 0.584 11.1 0.75 3.03
881.85 883 1.15 VS077711 0.629 14.8 0.78 3.04
883 884 1.00 VS077713 0.44 10.95 0.52 3.03
884 885 1.00 VS077714 0.363 12.6 0.48 3.03
885 886.05 1.05 VS077715 0.358 13.75 0.54 3.01
886.05 886.7 0.65 VS077716 5.52 14.45 5.69 3.15
886.7 888 1.30 VS077717 0.386 12.35 0.4 3.02
===== SIDA 77 =====
74
HOLE ID: VDD25013D
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
888 889 1.00 VS077718 0.591 14.8 0.66 3.16
889 889.45 0.45 VS077719 0.524 11.5 0.59 2.98
889.45 890 0.55 VS077720 0.285 11.5 0.32 3.01
890 891 1.00 VS077721 0.575 13.8 0.75 3.03
891 892 1.00 VS077722 0.516 11.45 0.56 2.98
892 893 1.00 VS077724 0.47 13 0.52 3.1
893 894 1.00 VS077725 0.295 13.05 0.35 3.23
894 895 1.00 VS077726 0.854 15.2 1.1 2.96
895 896 1.00 VS077727 0.871 12.7 1.01 3.06
896 896.45 0.45 VS077728 0.411 12.05 0.44 3.01
896.45 897.2 0.75 VS077729 0.77 13.65 0.85 3.04
897.2 897.95 0.75 VS077730 1.515 13.1 1.54 3.18
897.95 899 1.05 VS077731 0.258 10.95 0.26 3.09
899 900 1.00 VS077732 0.161 11.55 0.36 3.09
900 901 1.00 VS077733 0.274 9.98 0.34 2.99
901 902 1.00 VS077735 0.666 11.95 0.77 3.00
902 903 1.00 VS077736 0.311 12.2 0.36 3.00
903 904 1.00 VS077737 0.322 11.4 0.37 3.01
904 905 1.00 VS077738 0.956 10.45 1.14 3.09
905 906 1.00 VS077739 0.444 10.75 0.57 3.09
906 907 1.00 VS077740 0.708 10.6 0.77 3.16
907 908 1.00 VS077741 0.166 11.15 0.19 3.12
908 909 1.00 VS077742 0.128 12.2 0.15 3.12
909 910 1.00 VS077743 0.081 12.15 0.09 3.07
910 911 1.00 VS077744 0.088 11.2 0.12 3.13
911 911.4 0.40 VS077746 0.285 11.7 0.43 3.13
911.4 912 0.60 VS077747 0.043 12.15 0.06 3.13
912 913 1.00 VS077748 0.064 12.35 0.1 3.19
913 914 1.00 VS077749 0.084 12.25 0.12 3.16
914 915 1.00 VS077750 0.1 12.55 0.12 3.16
915 916 1.00 VS077751 0.111 12.95 0.16 3.12
916 916.45 0.45 VS077752 0.072 13.15 0.1 3.08
916.45 917 0.55 VS077753 0.391 12.55 0.56 3.08
917 918 1.00 VS077754 0.149 12.6 0.21 3.03
918 918.9 0.90 VS077755 0.457 11.9 0.61 3.04
918.9 920 1.10 VS077757 0.388 14.8 0.46 3.04
920 921 1.00 VS077758 0.329 13.75 0.31 3.04
921 921.65 0.65 VS077759 0.84 16.75 0.94 2.96
921.65 922.45 0.80 VS077760 2.08 20.2 2.29 2.96
922.45 923 0.55 VS077761 0.352 8.84 0.49 2.87
923 924 1.00 VS077762 0.642 9.77 0.71 2.89
924 924.7 0.70 VS077763 1.37 13.25 1.34 2.99
924.7 926 1.30 VS077764 0.754 15.6 0.96 3.12
926 927 1.00 VS077765 0.759 18 0.82 3.14
927 928.2 1.20 VS077766 0.409 13 0.49 3.18
928.2 929 0.80 VS077768 0.872 9.31 0.94 2.88
929 930 1.00 VS077769 0.565 9.91 0.6 2.99
===== SIDA 78 =====
75
HOLE ID: VDD25013D
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
930 931 1.00 VS077770 0.988 7.61 1.11 2.97
931 932.3 1.30 VS077771 1.125 9.07 1.22 2.96
932.3 933 0.70 VS077772 0.576 10.1 0.64 3.02
933 934 1.00 VS077773 0.395 10.85 0.42 3.21
934 935 1.00 VS077774 0.432 12 0.44 3.19
935 936 1.00 VS077775 0.314 11.3 0.34 3.11
936 936.75 0.75 VS077776 0.376 13.95 0.42 3.17
936.75 938 1.25 VS077777 0.433 12.3 0.44 3.03
938 939 1.00 VS077779 0.379 9.99 0.45 2.97
939 940 1.00 VS077780 0.725 10.35 0.8 2.98
940 941 1.00 VS077781 0.212 9.76 0.22 2.98
941 942 1.00 VS077782 0.588 13.9 0.63 3.31
942 943 1.00 VS077783 0.622 9.61 0.64 3
943 943.85 0.85 VS077784 1.13 9.89 1.26 3.03
943.85 945 1.15 VS077785 0.264 9.36 0.3 3.02
945 946 1.00 VS077786 0.119 10.45 0.11 3.01
946 947 1.00 VS077787 0.5 13 0.54 3.01
947 947.45 0.45 VS077788 0.285 10.95 0.29 3.01
947.45 948 0.55 VS077790 0.645 10.3 0.69 3.01
948 949 1.00 VS077791 0.656 12.7 0.72 3.08
949 949.75 0.75 VS077792 0.363 16.95 0.4 3.08
949.75 951 1.25 VS077793 0.174 14.3 0.19 3.14
951 951.85 0.85 VS077794 0.403 9.67 0.45 3.09
951.85 953 1.15 VS077795 0.42 10.8 0.44 3.03
953 954 1.00 VS077796 0.83 10.85 0.87 3.08
954 955 1.00 VS077797 0.576 13.6 0.65 3.08
955 956 1.00 VS077798 0.47 12.55 0.52 3.12
956 956.7 0.70 VS077799 0.126 10.95 0.13 3.05
956.7 957.4 0.70 VS077801 0.136 10.05 0.16 2.97
957.4 958 0.60 VS077802 0.943 20.8 0.94 3.45
958 959.15 1.15 VS077803 1.395 15 1.3 3
959.15 960 0.85 VS077804 1.29 14.9 1.36 3.32
960 961 1.00 VS077805 0.79 12.3 0.83 2.99
961 962 1.00 VS077806 0.222 11.85 0.2 3.06
962 963 1.00 VS077807 1.205 11.8 1.2 2.99
963 964 1.00 VS077808 0.392 9.1 0.41 3.02
964 965 1.00 VS077809 1.775 14.05 1.74 3.06
965 966 1.00 VS077810 1.495 13.25 1.36 3.58
966 967 1.00 VS077812 0.434 9.99 0.43 3.02
967 968.1 1.10 VS077813 0.198 9.93 0.19 2.99
968.1 969 0.90 VS077814 0.529 9.3 0.52 3
969 969.75 0.75 VS077815 1.035 10.55 0.96 2.99
969.75 971 1.25 VS077816 0.557 10.05 0.55 2.94
971 972.3 1.30 VS077817 0.389 8.05 0.35 2.98
972.3 973.2 0.90 VS077818 0.326 9.63 0.28 3.06
973.2 974.25 1.05 VS077819 0.72 10.4 0.63 3.13
974.25 975.2 0.95 VS077820 1.95 10.8 1.72 3.07
===== SIDA 79 =====
76
HOLE ID: VDD25013D
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
975.2 976 0.80 VS077821 0.953 12.9 0.74 3.05
976 977.3 1.30 VS077823 0.692 9.91 0.64 3.01
977.3 978.6 1.30 VS077824 0.945 12.7 0.8 3.02
978.6 979.9 1.30 VS077825 0.406 10.1 0.35 3.02
979.9 981.2 1.30 VS077826 0.546 11.6 0.45 3.00
981.2 982.5 1.30 VS077827 0.555 9.87 0.52 3.00
982.5 983.8 1.30 VS077828 0.319 10.55 0.32 2.98
983.8 985.1 1.30 VS077829 0.15 10.9 0.12 2.99
985.1 986.4 1.30 VS077830 0.459 9.94 0.41 3
986.4 987.7 1.30 VS077831 0.565 9.96 0.53 3.01
987.7 989 1.30 VS077832 0.327 11.2 0.3 3.01
989 990.3 1.30 VS077834 0.763 15.05 0.72 3.01
990.3 991.6 1.30 VS077835 0.269 11.7 0.23 3.02
991.6 992.9 1.30 VS077836 0.688 10.95 0.59 3.02
992.9 993.85 0.95 VS077837 0.196 10.9 0.19 3.03
993.85 995.15 1.30 VS077838 0.499 10.35 0.43 2.97
995.15 996.45 1.30 VS077839 0.298 10.7 0.26 3.06
996.45 997.75 1.30 VS077840 0.793 11.6 0.69 3.01
997.75 998.85 1.10 VS077841 1.225 8.39 1.16 2.91
998.85 1000.15 1.30 VS077842 0.372 11.2 0.39 3.01
1000.15 1001.45 1.30 VS077843 0.352 12.2 0.32 3.06
1001.45 1002.75 1.30 VS077845 0.493 11.9 0.49 3.02
1002.75 1004.05 1.30 VS077846 0.597 12.35 0.58 3.02
1004.05 1005.35 1.30 VS077847 0.759 11.2 0.72 3.04
1005.35 1006.4 1.05 VS077848 0.761 11.65 0.74 3.02
1006.4 1007.3 0.90 VS077849 0.801 12.9 0.69 3.01
1007.3 1008.6 1.30 VS077850 0.846 12.25 0.75 3
1008.6 1009.9 1.30 VS077851 0.742 10.35 0.75 3.00
1009.9 1011.2 1.30 VS077852 0.745 11.3 0.78 3.00
1011.2 1012.5 1.30 VS077853 0.088 12.2 0.09 2.99
1012.5 1013.8 1.30 VS077854 0.073 12.55 0.08 3.00
1013.8 1014.9 1.10 VS077856 0.172 13.45 0.19 3.00
1014.9 1016.05 1.15 VS077857 0.162 12.4 0.16 3.01
1016.05 1017.3 1.25 VS077858 0.338 12.2 0.28 3.01
1017.3 1018.6 1.30 VS077859 0.852 12.1 0.69 3.01
1018.6 1019.9 1.30 VS077860 0.353 11.4 0.33 3
1019.9 1021.2 1.30 VS077861 0.498 10.75 0.39 2.99
1021.2 1022.5 1.30 VS077862 0.636 11.75 0.52 2.99
1022.5 1023.8 1.30 VS077863 0.783 10.95 0.63 2.98
1023.8 1024.7 0.90 VS077864 0.372 12.15 0.33 2.99
1024.7 1025.6 0.90 VS077865 0.258 12.2 0.24 2.99
1025.6 1026.9 1.30 VS077867 1.07 12.9 0.88 2.99
1026.9 1028.2 1.30 VS077868 0.963 13.2 0.83 3.12
1028.2 1029.5 1.30 VS077869 1.085 12.3 0.87 2.97
1029.5 1030.8 1.30 VS077870 1.495 11.65 1.29 3.03
1030.8 1032.1 1.30 VS077871 1.42 10.15 1.25 3.09
1032.1 1033.4 1.30 VS077872 1.275 9.92 1.27 3.05
===== SIDA 80 =====
77
HOLE ID: VDD25013D
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1033.4 1034.7 1.30 VS077873 0.439 9.06 0.38 2.93
1034.7 1035.65 0.95 VS077874 0.801 10.85 0.66 3.07
1035.65 1036.95 1.30 VS077875 1.875 11.3 1.46 3.09
1036.95 1038.25 1.30 VS077876 0.407 10.95 0.31 3
1038.25 1039.55 1.30 VS077878 0.267 11.25 0.21 3.03
1039.55 1040.85 1.30 VS077879 1.455 11.2 1.21 3.08
1040.85 1042.15 1.30 VS077880 1.405 13.1 1.04 3.07
1042.15 1043.2 1.05 VS077881 0.408 12.25 0.34 3.02
1043.2 1044.1 0.90 VS077882 0.636 11.5 0.57 3.05
1044.1 1044.95 0.85 VS077883 0.303 11.65 0.3 3
1044.95 1046.25 1.30 VS077884 0.313 11.65 0.29 2.99
1046.25 1047.55 1.30 VS077885 0.278 11.4 0.25 2.99
1047.55 1048.85 1.30 VS077886 0.227 10.2 0.22 2.98
1048.85 1049.8 0.95 VS077887 0.309 10.65 0.29 3.01
1049.8 1051.1 1.30 VS077889 1.635 12.65 1.38 3.04
1051.1 1052.4 1.30 VS077890 1.33 11.75 1.17 3
1052.4 1053.7 1.30 VS077891 0.569 11.05 0.55 3.09
1053.7 1054.9 1.20 VS077892 0.259 10.5 0.26 3.06
1054.9 1056.2 1.30 VS077893 0.296 11.3 0.32 2.97
1056.2 1057.5 1.30 VS077894 0.265 11.85 0.27 3.02
1057.5 1058.5 1.00 VS077895 0.358 12.25 0.32 3.06
1058.5 1059.5 1.00 VS077896 0.454 11.3 0.38 3.04
1059.5 1060.35 0.85 VS077897 0.255 11.9 0.25 3.04
1060.35 1061.65 1.30 VS077898 0.495 13.25 0.47 3.02
1061.65 1062.6 0.95 VS077900 1.35 13.85 1.25 3.23
1062.6 1063.55 0.95 VS077901 1.47 13.85 1.24 3.17
1063.55 1064.85 1.30 VS077902 0.16 12.25 0.15 2.98
1064.85 1066.15 1.30 VS077903 0.062 11.6 0.06 2.97
1066.15 1067.45 1.30 VS077904 0.296 13.55 0.27 2.97
1067.45 1068.75 1.30 VS077905 0.104 15.95 0.1 2.96
1068.75 1069.9 1.15 VS077906 0.261 14.25 0.23 3.01
1069.9 1070.6 0.70 VS077907 1.05 14.2 1.04 3.05
1070.6 1071.3 0.70 VS077908 0.874 15.7 0.88 3.27
1071.3 1072.6 1.30 VS077909 0.325 13.25 0.36 3.05
1072.6 1073.9 1.30 VS077911 0.09 16.55 0.1 3.05
1073.9 1075.2 1.30 VS077912 0.043 14.8 0.07 3.05
1075.2 1076.5 1.30 VS077913 0.326 12.85 0.38 3.05
1076.5 1077.8 1.30 VS077914 0.088 11.85 0.14 3.02
1077.8 1078.95 1.15 VS077915 0.164 13.8 0.28 3.02
1078.95 1080 1.05 VS077916 0.821 13 1.24 2.98
1080 1081.05 1.05 VS077917 0.495 12.85 0.84 3.09
1081.05 1082.35 1.30 VS077918 0.135 12.15 0.15 2.98
1082.35 1083.65 1.30 VS077919 0.094 13.25 0.12 3.05
1083.65 1084.95 1.30 VS077920 0.228 12.9 0.3 3.11
1084.95 1085.9 0.95 VS077922 0.172 13.85 0.28 3.11
1085.9 1086.9 1.00 VS077923 0.317 12.05 0.38 3.11
1086.9 1087.8 0.90 VS077924 0.393 13.05 0.48 3.1
===== SIDA 81 =====
78
HOLE ID: VDD25013D
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1087.8 1088.75 0.95 VS077925 0.193 14.1 0.21 3.02
1088.75 1090.05 1.30 VS077926 0.102 16.65 0.18 3.07
1090.05 1091.35 1.30 VS077927 0.079 14.75 0.12 3.09
1091.35 1092.6 1.25 VS077928 0.034 14.3 0.07 3.07
1092.6 1093.9 1.30 VS077929 0.427 11.4 0.78 3.06
1093.9 1094.9 1.00 VS077930 0.736 10.65 1.35 2.97
1094.9 1096.2 1.30 VS077931 0.184 13 0.38 3.06
1096.2 1097.4 1.20 VS077933 0.176 15.05 0.35 3.08
1097.4 1098.55 1.15 VS077934 0.471 15.55 0.72 3.15
1098.55 1099.85 1.30 VS077935 0.427 26.2 0.96 3.73
1099.85 1101 1.15 VS077936 0.28 15.6 0.52 3.01
1101 1102.3 1.30 VS077937 0.027 13 0.08 3.07
1102.3 1103.6 1.30 VS077938 0.028 13.65 0.05 3.03
1103.6 1104.9 1.30 VS077939 0.126 12.85 0.2 3.03
1104.9 1106.2 1.30 VS077940 0.043 13.6 0.09 2.99
1106.2 1107.5 1.30 VS077941 0.041 10.9 0.07 2.96
1107.5 1108.8 1.30 VS077942 0.041 11.2 0.08 2.96
1108.8 1110.1 1.30 VS077944 0.041 8.26 0.09 2.92
1110.1 1111.4 1.30 VS077945 0.051 9.36 0.1 2.93
1111.4 1112.7 1.30 VS077946 0.028 9.77 0.07 2.93
1112.7 1114 1.30 VS077947 0.017 8.89 0.03 2.94
1114 1115.3 1.30 VS077948 0.026 8.41 0.03 2.95
1115.3 1116.6 1.30 VS077949 0.017 8.32 0.03 2.95
1116.6 1117.9 1.30 VS077950 0.018 8.83 0.05 2.95
1117.9 1119 1.10 VS077951 0.025 9.66 0.06 2.96
1119 1120.3 1.30 VS077952 0.066 9.53 0.08 3.00
1120.3 1121.6 1.30 VS077953 0.098 11.3 0.08 3.03
1121.6 1122.6 1.00 VS077955 0.049 9.07 0.05 2.99
1122.6 1123.6 1.00 VS077956 0.026 7.96 0.07 2.99
1123.6 1124.6 1.00 VS077957 0.219 8.88 0.46 2.94
1124.6 1125.65 1.05 VS077958 0.666 10.75 2.13 2.98
1125.65 1126.75 1.10 VS077959 1.72 15.7 5.42 3.13
1126.75 1128.05 1.30 VS077960 0.15 6.02 0.34 2.89
1128.05 1129.35 1.30 VS077961 0.041 6.21 0.14 2.86
1129.35 1130.65 1.30 VS077962 0.23 6.25 0.56 2.86
1130.65 1131.95 1.30 VS077963 0.18 6.08 0.53 2.83
1131.95 1133.25 1.30 VS077964 0.18 7.82 0.55 2.90
1133.25 1134.55 1.30 VS077966 0.02 8.17 0.05 2.90
1134.55 1135.6 1.05 VS077967 0.084 11.3 0.25 2.97
1135.6 1136.7 1.10 VS077968 0.218 11.55 0.66 2.95
1136.7 1138 1.30 VS077969 0.065 6.57 0.11 2.95
1138 1139.2 1.20 VS077970 0.022 10.45 0.05 2.92
===== SIDA 82 =====
79
HOLE ID: VDD24115B
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
672.5 674.8 2.3 VS077467 0.005 13.6 0.05 3.1
681.75 683.5 1.75 VS063376 0.012 9.79 0.03 2.96
683.5 685.55 2.05 VS063377 0.015 9.57 0.05 2.96
685.55 685.95 0.4 VS063378 0.486 19.9 1.38 2.77
685.95 687.85 1.9 VS063379 0.028 10.4 0.09 2.77
687.85 689.45 1.6 VS063380 0.008 7.46 0.03 2.77
689.45 691.15 1.7 VS063381 0.003 2.44 0.27 2.58
691.15 693.6 2.45 VS063382 0.049 6.91 0.06 2.7
693.6 695.3 1.7 VS063383 0.096 6.23 0.11 2.7
695.3 697.3 2 VS063384 0.064 5.79 0.06 2.7
697.3 698.4 1.1 VS063385 0.734 13.15 1.18 2.7
698.4 700.25 1.85 VS063387 0.25 8.4 0.29 2.7
700.25 702.8 2.55 VS063388 0.088 5.91 0.12 2.81
702.8 705.2 2.4 VS063389 0.076 6.07 0.11 2.95
705.2 707.98 2.78 VS063390 0.027 5.72 0.05 2.95
707.98 709.75 1.77 VS063391 0.007 6.23 0.02 2.95
709.75 710.3 0.55 VS063392 0.006 9.57 0.03 2.95
710.3 712.9 2.6 VS063393 0.056 12.7 0.1 3.09
712.9 714.95 2.05 VS063394 0.043 11.45 0.12 3.05
714.95 717.45 2.5 VS063395 0.048 11.85 0.11 3.05
717.45 719.95 2.5 VS063396 0.099 10.9 0.19 3.01
719.95 721.45 1.5 VS063398 0.024 6.88 0.04 3.01
721.45 723.55 2.1 VS063399 0.048 6.85 0.07 3.01
723.55 726.35 2.8 VS063400 0.036 10.15 0.06 3
726.35 728.2 1.85 VS063401 0.027 9.31 0.05 2.94
728.2 729.85 1.65 VS063402 0.027 14.95 0.05 2.94
729.85 731.25 1.4 VS063403 0.042 13.2 0.16 2.94
731.25 733 1.75 VS063404 0.007 8.51 0.03 2.94
733 733.75 0.75 VS063405 0.132 8.55 0.24 2.94
733.75 735.5 1.75 VS063407 0.006 7.99 0.02 2.88
735.5 737.1 1.6 VS063408 0.012 7.6 0.02 2.9
737.1 737.95 0.85 VS063409 0.087 14.9 0.26 2.9
737.95 739.45 1.5 VS063685 0.122 13.4 0.29 2.9
739.45 740.45 1 VS063686 0.061 12 0.11 2.9
740.45 741.3 0.85 VS063687 0.128 13.3 0.27 2.9
741.3 742.85 1.55 VS063688 0.028 5.38 0.04 2.9
742.85 744.7 1.85 VS063689 0.015 6.89 0.03 2.92
744.7 746.4 1.7 VS063690 0.004 7.09 0.03 2.89
746.4 748.35 1.95 VS063691 0.007 7.58 0.03 2.89
748.35 750.3 1.95 VS063692 0.004 7.47 0.005 2.89
750.3 752.15 1.85 VS063693 0.004 7.95 0.005 2.86
752.15 754.5 2.35 VS063694 0.004 7.08 0.005 2.85
754.5 757.37 2.87 VS063696 0.002 7.24 0.005 2.85
757.37 760.2 2.83 VS063697 0.003 6.85 0.03 2.84
760.2 763 2.8 VS063698 0.017 7.03 0.05 2.81
763 765.28 2.28 VS063699 0.045 5.81 0.09 2.81
765.45 765.85 0.4 VS063700 0.018 4.54 0.06 2.81
===== SIDA 83 =====
80
HOLE ID: VDD24115B
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
765.85 767.05 1.2 VS063701 0.237 15.15 0.77 2.81
767.05 769.75 2.7 VS063702 0.557 12.4 1.22 2.77
769.75 771.55 1.8 VS063703 0.15 5.59 0.35 2.81
771.55 774 2.45 VS063704 0.004 7.63 0.02 2.81
774 776.55 2.55 VS063705 0.002 6.69 0.02 2.81
776.55 779.12 2.57 VS063707 0.004 6.4 0.04 2.85
779.12 781.3 2.18 VS063708 0.003 7.03 0.02 2.97
781.3 782.82 1.52 VS063709 0.005 7.44 0.04 2.97
782.82 784.64 1.82 VS063710 0.009 6.79 0.03 2.97
784.64 786.15 1.51 VS063711 0.013 7.78 0.06 2.97
786.15 787.35 1.2 VS063712 0.039 13.1 0.12 2.97
787.35 790 2.65 VS063713 0.055 10.3 0.12 3.08
790 792.67 2.67 VS063714 0.026 9.48 0.07 2.96
792.88 794.47 1.59 VS063715 0.011 11.05 0.06 2.96
794.47 795.85 1.38 VS063716 0.018 7.39 0.07 2.83
795.85 796.4 0.55 VS063717 0.008 6.99 0.04 2.85
796.4 798.7 2.3 VS063719 0.033 7.36 0.08 2.85
798.7 801.05 2.35 VS063720 0.008 7.88 0.03 2.85
801.05 803.35 2.3 VS063721 0.004 7.58 0.03 2.85
803.35 806.28 2.93 VS063722 0.009 7.42 0.04 2.86
806.28 807.46 1.18 VS063723 0.006 8.07 0.04 2.86
807.46 810.39 2.93 VS063724 0.018 7.96 0.05 2.86
810.39 813.14 2.75 VS063725 0.002 7.88 0.03 2.86
813.14 815.96 2.82 VS063726 0.002 7.95 0.03 2.86
815.96 818.6 2.64 VS063727 0.001 7.5 0.02 2.86
818.6 821.6 3 VS063728 0.009 7.58 0.09 2.86
821.6 824.6 3 VS063730 0.006 7.29 0.04 2.86
824.6 825.7 1.1 VS063731 0 8.24 0.02 2.89
825.7 828.65 2.95 VS063732 0.001 8.66 0.03 2.89
828.65 831.35 2.7 VS063733 0.003 7.58 0.02 2.91
831.35 834.3 2.95 VS063734 0.003 7.85 0.02 2.93
834.3 836.58 2.28 VS063735 0.007 7.69 0.05 2.93
836.58 838.93 2.35 VS063736 0.006 7.79 0.04 2.94
838.93 841 2.07 VS063737 0.02 8.56 0.07 2.92
841 842.2 1.2 VS063738 1.27 9.85 2.61 2.92
842.2 843.4 1.2 VS063739 0.673 10.3 1.43 2.92
843.4 845.2 1.8 VS063741 0.058 8.26 0.14 2.92
845.2 847.2 2 VS063742 0.009 8.45 0.03 2.89
847.2 849.2 2 VS063743 0.027 8.31 0.1 2.87
849.2 852.1 2.9 VS063744 0.042 8.47 0.15 2.87
852.1 854 1.9 VS063745 0.012 7.19 0.04 2.87
854 854.74 0.74 VS063746 1.665 11.6 1.63 2.87
854.74 856.3 1.56 VS063747 0.033 7.33 0.07 2.87
856.3 858.15 1.85 VS063748 0.02 7.49 0.06 2.84
858.15 860.15 2 VS063749 0.038 8.34 0.1 2.89
860.15 862.15 2 VS063750 0.004 7.86 0.04 2.89
862.15 864.22 2.07 VS063752 0.002 8.15 0.03 2.93
===== SIDA 84 =====
81
HOLE ID: VDD24115B
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
864.22 866.15 1.93 VS063753 0.01 8.16 0.04 2.92
866.15 868.15 2 VS063754 0.013 8.16 0.07 2.92
868.15 870.15 2 VS063755 0.009 8.72 0.05 2.92
870.15 872.15 2 VS063756 0.033 8.4 0.11 2.92
872.15 874.18 2.03 VS063757 0.03 8.72 0.08 2.9
874.18 876.52 2.34 VS063758 0.012 7.75 0.06 2.9
876.52 878.55 2.03 VS063759 0.009 8.09 0.06 2.9
878.55 879.7 1.15 VS063760 0.029 11.3 0.08 2.9
879.7 881.15 1.45 VS063762 0.049 9.37 0.15 2.9
881.15 881.95 0.8 VS063763 0.369 12 0.98 2.9
881.95 882.75 0.8 VS063764 0.11 7.88 0.35 2.9
882.75 883.5 0.75 VS063765 1.605 10.6 3.74 2.9
883.5 885.1 1.6 VS063767 0.207 6.58 0.46 2.9
885.1 887 1.9 VS063768 0.187 6.17 0.51 2.9
887 888.6 1.6 VS063769 0.067 5.51 0.19 2.89
888.6 890.55 1.95 VS063770 0.087 7.85 0.33 2.91
890.55 892.55 2 VS063771 0.03 7.62 0.16 2.95
892.55 893.78 1.23 VS063772 0.037 7.91 0.14 2.95
893.78 894.3 0.52 VS063774 2.35 9.66 13.75 2.95
894.3 895.85 1.55 VS063775 0.02 8.1 0.09 2.95
895.85 897.25 1.4 VS063776 0.007 7.71 0.04 2.95
897.25 899.35 2.1 VS063777 0.028 7.83 0.11 2.95
899.35 900.7 1.35 VS063778 0.045 8.31 0.16 2.95
900.7 902.17 1.47 VS063779 0.002 7.9 0.03 2.95
902.17 903.15 0.98 VS063780 2.14 8.93 6.5 2.95
903.15 905 1.85 VS063782 0.069 8.05 0.26 2.98
905 906.9 1.9 VS063783 0.075 7.72 0.23 2.95
906.9 907.97 1.07 VS063851 0.035 7.81 0.15 2.95
907.97 908.95 0.98 VS063852 0.32 6.89 1.2 2.95
908.95 910 1.05 VS063853 0.01 7.59 0.08 2.91
910 910.8 0.8 VS063854 0.056 7.33 0.19 2.97
910.8 911.63 0.83 VS063855 0.343 8.37 1.38 2.88
911.63 913.13 1.5 VS063856 0.214 5.01 0.8 2.79
913.13 914.45 1.32 VS063857 0.15 6.07 0.7 2.87
914.45 917.33 2.88 VS063858 0.188 7.61 0.68 2.95
917.33 920.2 2.87 VS063859 0.036 3.66 0.16 2.92
920.2 921.29 1.09 VS063860 0.216 4.99 1.02 2.88
921.29 922.29 1 VS063862 0.876 14.4 3.51 2.96
922.29 923.29 1 VS063863 0.383 8.6 1.7 2.96
923.29 924.31 1.02 VS063864 0.503 6.58 2.2 2.96
924.31 925.35 1.04 VS063865 0.188 9.04 0.78 3.03
925.35 926.33 0.98 VS063866 0.481 9.89 1.54 2.89
926.33 927.33 1 VS063867 0.131 5.05 0.52 2.89
927.33 928.35 1.02 VS063868 0.042 3.74 0.19 2.74
928.35 929.61 1.26 VS063869 0.729 8 2.89 2.85
929.61 930.88 1.27 VS063870 0.818 9.09 3.02 2.95
930.88 932.57 1.69 VS063872 0.051 4.58 0.2 2.73
===== SIDA 85 =====
82
HOLE ID: VDD24115B
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
932.57 934.19 1.62 VS063873 0.268 3.95 0.93 2.82
934.19 935.27 1.08 VS063874 0.378 5.22 1.4 2.82
935.27 936.33 1.06 VS063875 0.128 4.87 0.51 2.82
936.33 937.41 1.08 VS063876 0.19 5.39 0.77 2.91
937.41 938.56 1.15 VS063877 0.604 5.58 2.22 2.9
938.56 939.67 1.11 VS063878 0.4 5.58 1.42 2.9
939.67 940.71 1.04 VS063879 0.126 4.23 0.35 2.9
940.71 941.8 1.09 VS063880 0.049 5.32 0.15 2.9
941.8 942.83 1.03 VS063882 0.573 8.17 1.8 2.9
942.83 943.75 0.92 VS063883 0.37 7.83 1.01 2.9
943.75 944.7 0.95 VS063884 0.372 11.8 1.19 2.9
944.7 945.6 0.9 VS063885 0.106 6.11 0.42 2.9
945.6 946.5 0.9 VS063886 0.439 9.14 1.4 2.9
946.5 947.54 1.04 VS063887 0.708 14.25 2.38 2.9
947.54 948.73 1.19 VS063889 0.893 14.3 3.06 4.52
948.73 949.92 1.19 VS063890 0.737 12.9 2.55 2.9
949.92 951.11 1.19 VS063891 0.841 12.3 2.4 2.9
951.11 952.24 1.13 VS063892 0.499 13.35 1.08 2.9
952.24 953.41 1.17 VS063893 0.093 13.6 0.2 2.9
953.41 954.52 1.11 VS063894 0.029 11.8 0.08 2.9
954.52 955.65 1.13 VS063895 0.01 12.55 0.05 3.17
955.65 956.79 1.14 VS063896 0.023 12.95 0.36 2.99
956.79 957.93 1.14 VS063897 0.078 12.3 0.29 2.99
957.93 958.9 0.97 VS063898 0.039 9.05 0.22 2.81
958.9 960 1.1 VS063900 0.042 6.56 0.55 2.7
960 960.68 0.68 VS063901 0.032 6.96 0.1 2.74
960.68 961.12 0.44 VS063902 0.008 6.45 0.86 2.76
961.12 961.91 0.79 VS063903 0.053 5.2 3.97 2.76
961.91 962.7 0.79 VS063904 0.038 7.75 2.24 2.76
963.2 964.04 0.84 VS063905 0.34 11.55 0.66 2.76
964.04 964.88 0.84 VS063907 0.116 9.67 0.15 2.76
964.88 966 1.12 VS063908 0.038 6.68 0.08 2.81
966 967.14 1.14 VS063909 0.004 7.79 0.005 2.85
967.14 968.25 1.11 VS063910 0.029 10.9 0.04 2.85
968.25 969.4 1.15 VS063911 0.001 7.58 0.005 2.85
969.4 970.53 1.13 VS063912 0.002 8.62 0.005 2.85
970.53 971.66 1.13 VS063913 0.002 8.89 0.03 2.85
971.66 972.8 1.14 VS063914 0.001 7.01 0.04 2.85
972.8 973.78 0.98 VS063915 0.021 9.07 0.05 2.89
973.78 974.69 0.91 VS063916 0.025 10.85 0.12 3.06
974.69 975.64 0.95 VS063917 0.02 11 0.08 3.06
975.64 976.93 1.29 VS063919 0.046 13.3 0.07 3.06
976.93 978.23 1.3 VS063920 0.165 11.65 0.18 3.23
978.23 979.41 1.18 VS063921 0.043 14.55 0.05 3.22
979.41 980.45 1.04 VS063922 0.039 13.1 0.06 3.22
980.45 981.55 1.1 VS063923 0.015 10.3 0.03 3.2
981.55 982.66 1.11 VS063924 0.012 14.25 0.03 3.33
===== SIDA 86 =====
83
HOLE ID: VDD24115B
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
982.66 983.77 1.11 VS063925 0.054 12.75 0.05 3.33
983.77 984.84 1.07 VS063926 0.06 15.4 0.07 3.33
984.84 985.98 1.14 VS063927 0.021 15.45 0.05 3.33
985.98 987.09 1.11 VS063928 0.001 10.95 0.02 3.33
987.09 987.77 0.68 VS063929 0.692 22 0.41 3.46
987.77 988.45 0.68 VS063931 0.106 16.05 0.11 3.29
988.45 989.6 1.15 VS063932 0.057 12.5 0.06 3.12
989.6 990.83 1.23 VS063933 0.057 15.5 0.04 3.15
990.83 991.98 1.15 VS063934 0.012 15 0.03 3.15
991.98 993.05 1.07 VS063935 0.092 12.9 0.11 3.15
993.05 994.2 1.15 VS063936 0.14 15.8 0.18 3.15
994.2 995.3 1.1 VS063938 0.169 14.25 0.23 3.15
995.3 996.42 1.12 VS063939 0.038 16 0.05 3.15
996.42 997.53 1.11 VS063940 0.009 15.45 0.02 3.2
997.53 998.64 1.11 VS063941 0.08 14.5 0.06 3.15
998.64 999.75 1.11 VS063942 0.02 14.2 0.05 3.15
999.75 1000.85 1.1 VS063943 0.03 14 0.04 3.15
1000.85 1001.97 1.12 VS063945 0.271 13.5 0.21 3.1
1001.97 1003.09 1.12 VS063946 0.697 18.85 0.71 3.35
1003.09 1004.22 1.13 VS063947 1.055 13.25 1.22 3.18
1004.22 1005.33 1.11 VS063948 0.615 12.85 0.63 3.02
1005.33 1006.47 1.14 VS063949 0.625 13.55 0.71 3.34
1006.47 1007.57 1.1 VS063950 0.845 13.35 0.96 3.24
1007.57 1008.69 1.12 VS063951 0.417 14.5 0.46 2.97
1008.69 1009.81 1.12 VS063953 0.472 11.75 0.58 3.07
1009.81 1010.88 1.07 VS063954 2.25 13 2.55 3.21
1010.88 1011.91 1.03 VS063955 2.51 22 3.61 3.16
1011.91 1013.04 1.13 VS063956 1.1 17.5 1.4 3.41
1013.04 1014.12 1.08 VS063957 0.961 20.3 1.24 3.44
1014.12 1015.2 1.08 VS063959 1.18 17.7 1.51 3.31
1015.2 1016.28 1.08 VS063960 1.3 18.15 1.82 3.29
1016.28 1017.32 1.04 VS063961 0.047 13.4 0.04 3.13
1017.32 1018.36 1.04 VS063962 0.13 13.8 0.19 3.18
1018.36 1019.39 1.03 VS063963 0.156 14.25 0.18 2.96
1019.39 1020.43 1.04 VS063965 0.118 13.95 0.18 2.99
1020.43 1021.47 1.04 VS063966 0.192 12.7 0.2 3.05
1021.47 1022.51 1.04 VS063967 0.116 12.8 0.15 2.92
1022.51 1023.55 1.04 VS063968 0.158 12.8 0.15 3.04
1023.55 1024.69 1.14 VS063970 0.521 9.53 0.54 3.33
1024.69 1025.76 1.07 VS063971 0.576 28.8 0.62 3.68
1025.76 1026.873 1.113 VS063972 0.688 20 0.7 3.13
1026.873 1028 1.127 VS063973 0.255 13.7 0.32 3.09
1028 1029.05 1.05 VS063974 0.231 14.85 0.3 3.06
1029.05 1030.13 1.08 VS063975 0.068 13.4 0.29 3.18
1030.13 1031.23 1.1 VS063976 0.023 13.7 0.04 3.15
1031.23 1032.31 1.08 VS063978 0.01 14.6 0.02 3.12
1032.31 1033.39 1.08 VS063979 0.028 13.5 0.04 3.1
===== SIDA 87 =====
84
HOLE ID: VDD24115B
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1033.39 1034.51 1.12 VS063980 0.099 12.5 0.12 3.08
1034.51 1035.57 1.06 VS063981 0.071 13.95 0.11 3.12
1035.57 1036.66 1.09 VS063982 0.12 14.75 0.18 3.17
1036.66 1037.79 1.13 VS063984 0.577 15.8 0.59 3.22
1037.79 1038.8 1.01 VS063985 0.611 15.2 0.59 3.16
1038.8 1039.81 1.01 VS063986 0.478 19.2 0.52 3.39
1039.81 1040.94 1.13 VS063987 0.028 11.65 0.04 2.96
1040.94 1042.1 1.16 VS063988 0.05 13.7 0.03 3.04
1042.1 1043.13 1.03 VS063989 0.033 11.7 0.03 2.99
1043.13 1044.29 1.16 VS063991 0.018 14.35 0.02 3.23
1044.29 1045.38 1.09 VS063992 0.018 12.8 0.02 2.93
1045.38 1046.38 1 VS063993 0.016 8.55 0.005 3.05
1046.38 1047.42 1.04 VS063994 0.018 10.15 0.005 3.1
1047.42 1048.35 0.93 VS063995 0.029 9.92 0.05 3.28
1048.35 1049.39 1.04 VS063996 0.021 10.75 0.04 3.35
1049.39 1050.26 0.87 VS063998 0.168 24.3 0.16 4.83
1050.26 1051.23 0.97 VS063999 0.116 15.1 0.15 3.23
1051.23 1052.3 1.07 VS064000 0.053 9.67 0.05 3.19
1052.3 1053.37 1.07 VS064001 0.028 10.4 0.04 2.94
1053.37 1054.4 1.03 VS064002 0.016 11.3 0.005 3.11
1054.4 1055.46 1.06 VS064004 0.032 11.95 0.03 3.09
1055.46 1056.58 1.12 VS064005 0.031 11.45 0.03 3.18
1056.58 1057.65 1.07 VS064006 0.009 9.53 0.02 3.13
1057.65 1058.67 1.02 VS064007 0.032 10.2 0.05 3.08
1058.67 1059.8 1.13 VS064008 0.055 10.45 0.07 3.05
1059.8 1060.9 1.1 VS064009 0.01 12.05 0.05 3.31
1060.9 1062.03 1.13 VS064010 0.656 19.35 0.87 3.65
1062.03 1062.99 0.96 VS064012 0.16 11.45 0.23 3.28
1062.99 1063.95 0.96 VS064013 0.043 10.2 0.07 2.85
1063.95 1064.9 0.95 VS064014 0.053 11.75 0.05 3.02
1064.9 1065.97 1.07 VS064015 0.02 10.5 0.03 3.14
1065.97 1067.03 1.06 VS064016 0.019 9.94 0.03 2.9
1067.03 1068.1 1.07 VS064017 0.07 11.7 0.06 3.29
1068.1 1069.22 1.12 VS064019 0.027 11.4 0.03 3.18
1069.22 1070.24 1.02 VS064020 0.01 10.6 0.02 3.54
1070.24 1071.34 1.1 VS064021 0.059 11.7 0.05 3.12
1071.34 1072.38 1.04 VS064022 0.02 11.55 0.03 2.95
1072.38 1073.47 1.09 VS064023 0.034 9.94 0.06 2.83
1073.47 1074.49 1.02 VS064024 0.498 20.2 0.73 3.31
1074.49 1075.58 1.09 VS064026 0.106 12.1 0.15 3.01
1075.58 1076.65 1.07 VS064027 0.011 10.7 0.02 3.08
1076.65 1077.68 1.03 VS064028 0.154 12.2 0.14 3.32
1077.68 1078.7 1.02 VS064029 0.032 11.05 0.02 3.06
1078.7 1079.77 1.07 VS064030 0.007 10.4 0.02 3.06
1079.77 1080.88 1.11 VS064031 0.016 11.25 0.02 3.06
1080.88 1081.85 0.97 VS064032 0.02 10.95 0.03 2.97
1081.85 1082.96 1.11 VS064033 0.008 10.9 0.005 2.97
===== SIDA 88 =====
85
HOLE ID: VDD24115B
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1082.96 1083.96 1 VS064034 0.014 8.89 0.02 2.88
1083.96 1085 1.04 VS064036 0.048 10.3 0.08 2.98
1085 1086.07 1.07 VS064037 0.354 10.4 0.59 2.98
1086.07 1087.1 1.03 VS064038 0.076 10.55 0.14 2.98
1087.1 1088.12 1.02 VS064039 0.042 9.66 0.07 2.98
1088.12 1089.19 1.07 VS064040 0.036 11.1 0.05 3.08
1089.19 1090.26 1.07 VS064041 0.39 13.05 0.77 3.12
1090.26 1090.95 0.69 VS064043 0.869 58.9 1.77 4.51
1090.95 1091.91 0.96 VS064044 0.613 12.5 1.18 3.44
1091.91 1092.88 0.97 VS064045 0.045 9.4 0.09 2.99
1092.88 1093.84 0.96 VS064046 0.077 10.35 0.06 2.96
1093.84 1094.9 1.06 VS064047 0.064 10.3 0.04 3.15
1094.9 1097 2.1 VS065045 0.08 9.08 0.09 2.95
1097 1099.07 2.07 VS065046 0.044 10.15 0.04 2.98
1099.07 1099.95 0.88 VS065047 0.295 10.8 0.19 2.98
1099.95 1101.12 1.17 VS065048 0.045 9.5 0.04 3
1101.12 1103.9 2.78 VS065049 0.084 11.65 0.1 2.96
1103.9 1106.1 2.2 VS065050 0.058 10.65 0.14 2.96
1106.1 1108.45 2.35 VS065051 0.299 11.25 0.56 2.96
1108.45 1111 2.55 VS065052 0.077 11.75 0.22 2.96
1111 1114 3 VS065053 0.038 10.2 0.07 2.96
1114 1117 3 VS065054 0.016 10.7 0.06 2.92
1117 1120 3 VS065055 0.032 11.45 0.11 2.91
1120 1123 3 VS065057 0.053 12.35 0.13 2.95
1123 1125 2 VS065058 0.051 12.05 0.12 2.95
1125 1127.35 2.35 VS065059 0.032 10.45 0.08 2.95
1127.35 1130 2.65 VS065060 0.029 10.65 0.06 2.99
1130 1133 3 VS065061 0.015 10.8 0.02 3
1133 1136 3 VS065062 0.004 11.55 0.005 3
1136 1139 3 VS065063 0.003 11.35 0.005 3.02
1139 1142 3 VS065064 0.017 8.98 0.05 3.01
1142 1145 3 VS065065 0.027 10.95 0.09 3.01
1145 1148 3 VS065066 0.013 9.61 0.02 3.01
1148 1150.85 2.85 VS065068 0.015 9.94 0.02 2.99
1150.85 1153 2.15 VS065069 0.03 11.55 0.09 3.04
1153 1156 3 VS065070 0.016 10.65 0.04 3.04
1156 1159 3 VS065071 0.072 11 0.17 3.04
1159 1162 3 VS065072 0.078 11.7 0.23 3.09
1162 1164.85 2.85 VS065073 0.022 9.87 0.04 3.05
1164.85 1166 1.15 VS065074 0.288 11.65 0.62 3.05
1166 1169 3 VS065075 0.029 11.4 0.08 3.05
1169 1172 3 VS065076 0.022 11.65 0.06 3
1172 1173.6 1.6 VS065077 0.012 11.95 0.05 3
1173.6 1175.65 2.05 VS065078 0.099 12.35 0.3 3
1175.65 1178.35 2.7 VS065127 0.022 12.9 0.03 3
1178.35 1181.21 2.86 VS065128 0.011 11.9 0.02 3
1181.21 1184.18 2.97 VS065129 0.008 10.9 0.02 3
===== SIDA 89 =====
86
HOLE ID: VDD24115B
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1184.18 1187.1 2.92 VS065130 0.042 10.45 0.11 3
1187.1 1189.67 2.57 VS065131 0.071 10.05 0.2 3
1189.67 1191.2 1.53 VS065132 0.008 11.25 0.02 3
1191.2 1192.55 1.35 VS065133 0.178 9.35 0.63 3
1192.55 1195.53 2.98 VS065135 0.003 10.4 0.005 3
1195.53 1198.42 2.89 VS065136 0.24 11.15 0.84 3
1198.42 1200 1.58 VS065137 0.025 10.35 0.05 3
1200 1201.52 1.52 VS065138 0.009 11.3 0.03 3
1201.52 1203.55 2.03 VS065139 0.012 11.15 0.05 3
1203.55 1204.97 1.42 VS065140 0.033 10.5 0.07 3
1204.97 1206.46 1.49 VS065141 0.002 10.6 0.005 3
1206.46 1208.11 1.65 VS065142 0.001 10.75 0.005 3
1208.11 1209.58 1.47 VS065143 0.001 10.8 0.005 3
1209.58 1210.8 1.22 VS065145 0.006 10.05 0.02 3
1210.8 1213.7 2.9 VS065146 0.003 10.75 0.005 3
1213.7 1216.54 2.84 VS065147 0.008 10.7 0.04 3
1216.54 1219.25 2.71 VS065148 0.001 10.05 0.005 3
1219.25 1222.05 2.8 VS065149 0.014 11.55 0.05 3
1222.05 1223.85 1.8 VS065150 0.007 11.45 0.02 3
1223.85 1225.13 1.28 VS065151 0.062 12.65 0.2 3
1225.13 1227.5 2.37 VS065152 0.148 13.75 0.32 3
1227.5 1230.48 2.98 VS065153 0.01 13.25 0.03 3
1230.48 1232 1.52 VS065154 0.01 14.95 0.05 3
1232 1233.53 1.53 VS065156 0.003 15.3 0.005 3
1233.53 1236.35 2.82 VS065157 0.016 15.15 0.04 3
1236.35 1237.65 1.3 VS065158 0.004 15.5 0.005 3
1237.65 1239.32 1.67 VS065159 0.022 12.7 0.07 3
1239.32 1241 1.68 VS065160 0.008 12.75 0.02 3
1241 1241.94 0.94 VS065162 0.122 10.85 0.31 3
1241.94 1243.44 1.5 VS065163 0.026 14.7 0.09 3
1243.44 1245.02 1.58 VS065164 0.013 14.9 0.03 3
1245.02 1246.8 1.78 VS065165 0.034 13.95 0.07 3
1246.8 1249.61 2.81 VS065166 0.012 14.95 0.03 3
1249.61 1251.98 2.37 VS065167 0.013 15.05 0.02 3
1251.98 1254.65 2.67 VS065168 0.043 14.05 0.08 3
1254.65 1257.39 2.74 VS065169 0.047 13.9 0.1 3
1257.39 1259.5 2.11 VS065170 0.056 13.6 0.13 3
1259.5 1262.2 2.7 VS065171 0.201 14.85 0.42 3
1262.2 1265.15 2.95 VS065924 0.095 15.6 0.17 3
1265.15 1268.1 2.95 VS065925 0.018 14.55 0.07 3.02
1268.1 1271 2.9 VS065926 0.086 13.45 0.12 3.04
1271 1272.44 1.44 VS065927 0.029 14.3 0.05 3.04
1272.44 1274 1.56 VS065928 0.006 13.25 0.005 3.04
1274 1275.05 1.05 VS065929 0.073 11.4 0.13 3.06
1275.05 1276.35 1.3 VS065930 0.088 9.41 0.15 2.98
1276.35 1277.62 1.27 VS065931 0.078 11.15 0.09 2.96
1277.62 1278.92 1.3 VS065932 0.009 11.2 0.02 3.1
===== SIDA 90 =====
87
HOLE ID: VDD24115B
DEPTH_FROM DEPTH_TO SAMPLE_LENGTH SAMPLE_ID CU_PCT FE_PCT AG_PPM DENSITY
1278.92 1280.22 1.3 VS065933 0.008 10.85 0.02 3.01
1280.22 1281.41 1.19 VS065935 0.011 10.6 0.03 2.97
1281.41 1282.65 1.24 VS065936 0.001 10.55 0.005 2.97
1282.65 1283.4 0.75 VS065937 0.011 10.4 0.03 2.96
1283.4 1284.65 1.25 VS065938 0.003 10.3 0.02 3.1
1284.65 1285.73 1.08 VS065939 0.105 10.6 0.14 3.06
1285.73 1286.9 1.17 VS065940 0.078 12 0.13 3.29
1286.9 1287.9 1 VS065941 0.601 44.5 0.59 3.97
1287.9 1288.9 1 VS065942 0.682 35.9 0.78 3.86
1288.9 1289.9 1 VS065943 0.641 12.6 0.69 3.12
1289.9 1290.9 1 VS065944 1.64 11.6 1.88 3.08
1290.9 1291.9 1 VS065946 0.55 9.54 0.82 2.97
1291.9 1292.78 0.88 VS065947 0.987 11.95 1.27 2.98
1292.78 1293.66 0.88 VS065948 0.911 11.6 1.02 3.15
1293.66 1294.31 0.65 VS065949 0.492 11 0.49 2.98
1294.31 1294.8 0.49 VS065950 0.539 9.74 1.54 2.92
1294.8 1295.78 0.98 VS065951 1.34 11.6 1.64 2.99
1295.78 1296.44 0.66 VS065952 0.622 11.4 0.84 3.12
1296.44 1297.22 0.78 VS065953 0.796 10.55 0.89 3.11
1297.22 1298 0.78 VS065954 1.675 9.59 1.89 2.92
1298 1299.21 1.21 VS065955 0.406 9.17 0.45 2.92
1299.21 1300.41 1.2 VS065957 0.204 9.55 0.19 2.97
1300.41 1301.5 1.09 VS065958 0.525 9.91 0.59 3.08
1301.5 1302.16 0.66 VS065959 1.88 10.1 2.13 2.96
1302.16 1302.9 0.74 VS065960 0.615 8.24 0.65 3
1302.9 1303.91 1.01 VS065961 0.158 8.26 0.19 2.98
1303.91 1304.9 0.99 VS065962 0.309 8.33 0.32 2.89
1304.9 1305.88 0.98 VS065963 0.274 8.21 0.36 3.07
1305.88 1307 1.12 VS065964 0.752 9.69 0.69 3.05
1307 1308 1 VS065965 1.275 13.4 1.15 3.11
1308 1308.77 0.77 VS065966 1.035 14 1.03 3.28
1308.77 1309.5 0.73 VS065968 1.42 14.9 1.5 3.13
1309.5 1310.23 0.73 VS065969 1.445 12.85 1.64 3.24
1310.23 1311 0.77 VS065970 0.426 12 0.46 3.47
1311 1311.7 0.7 VS065971 2.02 13.05 2.15 2.94
1311.7 1312.65 0.95 VS065972 0.193 6.86 0.19 2.98
1312.65 1313 0.35 VS065973 1.69 8.81 1.92 3.54
1313 1313.35 0.35 VS065974 4.28 16.25 4.49 2.96
1313.35 1314.29 0.94 VS065975 0.947 10.1 0.98 2.94
1314.29 1315.15 0.86 VS065976 0.365 8.45 0.38 3.24
1315.15 1315.96 0.81 VS065977 0.097 7.59 0.13 2.99
1315.96 1316.65 0.69 VS065979 0.07 7.15 0.08 3.06
1316.65 1317.25 0.6 VS065980 0.744 6.34 0.66 2.98
1317.25 1318 0.75 VS065981 0.415 8.09 0.47 3.02
1318 1318.73 0.73 VS065982 1.82 8.19 1.89 3.33
1318.73 1319.4 0.67 VS065983 2.35 11.65 2.39 3.11
1319.4 1319.96 0.56 VS065984 1.455 6.88 1.57 3.02
===== SIDA 91 =====